Affected Component: STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS

Date Published
MAY 08, 2014
NHTSA TSB #
10112063
TSB Document
Summary
This Preliminary Information communication provides information to the technician about vehicles with erratic or hesitation when opening and closing the power lift gate. There may be a diagnostic trouble code B153A set in the power lift gate module. This concern could occur if the left lift gate actuator is internally coming apart. The actuator will need to be replaced however care must be taken when removing the actuator from the vehicle. If the internal portion of the actuator had completely separated the end of the actuator could become a projectile when removed. Obtain a number 8 self-tapping screw that measures 1 ½ inches long. Fully open the lift gate and install the screw anywhere in a 30 millimeter space from the bottom of the smooth tube to secure the tubes. Continue with the lift gate actuator by following the lift gat power assist actuator procedure in service information.