2014 Mini Cooper
NHTSA Defect Investigations
The Office of Defects Investigations (ODI) is an office within the NHTSA which investigates serious safety problems in the design, construction or performance of vehicles. The NHTSA is authorized to order manufacturers to recall and repair vehicles, if the ODI finds a safety issue. NHTSA investigations for the 2014 Mini Cooper, both ongoing and closed, are listed below:
International Autos, Inc. / Mini Recall NHTSA Defect Investigation #AQ15003
Summary: NHTSA is opening this audit query in order to determine whether International Autos, Inc. of West Allis, Wisconsin has complied with the requirements of the National Traffic and Motor Vehicle Safety Act. The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and noncompliances with Federal Motor Vehicle Safety Standards and in turn that a dealer not sell a new vehicle subject to a recall unless the recall remedy has been performed. 49 U.S.C. § 30166. NHTSA is in receipt of information that alleges this dealer sold and delivered at least one new vehicle to a first purchaser without having remedied the noncompliance. Accordingly, we are opening this audit query to seek information concerning these allegations and to verify whether improper sales were made. The recall included in this audit is NHTSA recall No. 15V-034.
NHTSA: For detailed information & supporting documents, see the official NHTSA page concerning investigation #AQ15003 »
BMW Reporting & Timely Recall Execution NHTSA Defect Investigation #AQ15004
Summary: NHTSA is opening this AQ to better understand and evaluate BMW's process(es) for its notification procedures and for timely and efficient execution of its safety recall campaigns.In mid-2014, NHTSA's New Car Assessment Program (NCAP) had side impact moving deformable barrier (MDB) tests performed on two model year (MY) 2014 Mini 2 Door Hardtop Coopers.These two tests were performed at a speed 5 mph higher than required by Federal Motor Vehicle Safety Standard (FMVSS) 214, Side impact protection.These tests measured spine acceleration results for the rear seated 5th percentile female dummy in excess of the value permitted in FMVSS 214.NHTSA viewed theseresults as indicating a potential problem and believes BMW should also have been concerned with the compliance of the vehicles with FMVSS 214.In October 2014, NHTSA's Office of Vehicle Safety Compliance (OVSC) had a FMVSS No. 214 MDB compliance test performed on a MY 2014 Mini 2 Door Hardtop Cooper.The subject Mini Cooper vehicles did not pass the test with respect to the spine acceleration value for the 5th percentile female dummy.BMW claimed that the certification for the MY 2014 Mini 2 Door Hardtop Cooper was based on the certification testing of the MY 2014 Mini 2 Door Hardtop Cooper S, a heavier vehicle.BMW further claimed that the Cooper model, as designed, could have the same weight rating as the Cooper S and would comply with the standard if tested at the higher vehicle test weight based on that weight rating.In December 2014 BMW filed a Part 573 Report for a noncompliance with FMVSS 214 for MY 2014 Mini Hardtop 2 Door Cooper model vehicles manufactured between December 2013 and May 2014.See NHTSA Recall14V-815.The remedy involved installing a small foam patch in the rear door panels.BMW also filed a Part 573 Report recalling MY 2014-2015 Mini 2 Door Hardtop Cooper models to raise the gross vehicle weight rating on the certification label and the vehicle capacity weight on the tire placard in late January of 2015.See NHTSA Recall 15V-034.In January 2015 BMW verbally committed that it would conduct a service campaign to add padding to the rear side panels of MY 2015 Mini 2 Door Hardtop Cooper models.However, BMW did not initiate the service campaign and failed to inform NHTSA of its failure to do so.In early July 2015, OVSC had an FMVSS No. 214 MDB test performed on a MY 2015 Mini 2 Door Hardtop Cooper.BMW technicians installed a foam pad in the rear side panels of the Cooper model vehicle prior to the test, which was the modification contemplated in the service campaign.The test of the Mini 2 Door Hardtop Cooper with the additional padding and at the higher test weight passed the test.However, this was the only vehicle on which the service campaign was performed and thus was not representative of in-use vehicles.In July 2015, OVSC also had a MY 2015 Cooper S tested to FMVSS 214.The MDB test of the Cooper S, which did not receive additional padding and at the test weight at which BMW claimed was significant to its test performance, showed a failure with respect to the spine acceleration value for the 5th percentile female dummy.On July 15, 2015, BMW filed a Part 573 Report for the MY 2014-15 Mini 2 Door Hardtop Cooper and Cooper S, and the MY 2015 John Cooper Works regarding a noncompliance with FMVSS 214.See NHTSA Recall 15V-450.NHTSA is concerned that BMW was aware or should have been aware of the non-compliance with FMVSS 214 and should have taken remedial action on the population of Mini Cooper vehicles identified in recall 15V-450 earlier than it did.It appears from a review of NHTSA's databases that BMW may have failed to submit recall communications to NHTSA in a timely manner.
NHTSA: For detailed information & supporting documents, see the official NHTSA page concerning investigation #AQ15004 »