1.9
hardly worth mentioning- Crashes / Fires:
- 0 / 0
- Injuries / Deaths:
- 0 / 0
- Average Mileage:
- 87,541 miles
About These NHTSA Complaints:
The NHTSA is the US gov't agency tasked with vehicle safety. Complaints can be spread across multiple & redundant categories, & are not organized by problem. See the Back button — blue bar at the very top of the page — to explore more.
« Read the previous 20 complaints
The contact owns a 2006 Chrysler PT CRUISER. The contact stated that while traveling 35 mph, the check engine warning light illuminated as the vehicle lost acceleration power. The vehicle was taken to a private mechanic where it was found that there was a misfire on cylinder 3. the vehicle was not repaired. The failure mileage was 60,000 and the current mileage was 63,000.
- Centerville, OH, USA
I bought a PT CRUISER sedan and the car lot I bought if from said it needed front shocks and it would be ready in two day. I pick up the PT CRUISER and decided to take it to my mechanic and have it check out from top to bottom. It has over 100 mechanical issues, from shocks which were never put on. There is oil in the spark plugs and leaves a smell when the heater is on which makes us very ill. It is not safe to drive. Also, the car lot I bought it from which it was sold for around $2,000 dollars and needs over $3,000 dollars worth of work. Then I got slapped with an extra 5,000 from the loan company. This is a lemon. I am not paying for anything and him and I have went around and around about this piece of junk. They can repo it and then I am getting an attorney for selling me a car that should not be on the road. Too dangerous.
- Elkhart, IN, USA
Failed crank seal. Car went in for routine inspection at dealership. They said it needed a new motor mount. When they returned the car, they mentioned it had a leak at the crank seal. We took the car home and it was heavily leaking oil, so we took it to another local garage. They "repaired" the seal, along with things like a new timing belt, etc "while we are in there" and returned the car at a cost of $1700. Drove it for only a few days while driving the oil light came on a few miles from home. When we got the car home there was nearly no oil left in the car, the crank seal had blown/ burned out again. Towed to garage. Told by garage and also dealership that it could not be repaired, the crank bearing was worn and would "walk out" and the same thing would happen. Was told it needed a new engine. (at 39K miles"?") my brother removed the engine himself, took it to a machine shop who removed the crank and used some sort of kit to repair the engine. The cost was $600 parts, $600 labor. The car recently was put back in service but is not trusted and the engine light is lit up. The car was not driven hard in its life (driven my by 70 yr old mother) and had regular service.
- Souderton, PA, USA
Dashboard lit up, engine stopped, vehicle slowed allowing me to make a right turn out of traffic. Was able to restart engine. Car history prior to incident on the road. No mechanical incidents, however engine cranking problems. Battery previously replaced and starter replaced on 05/28/2013 by mcx auto service center, mcas miramar, san diego, ca., 92145, phone number (858) 536-1684. Since, first stalled incident, engine failure of the same has happened 3 more times, all in light street traffic with no injuries. Vehicle restarted after each incident. Latest incident August 01, 2013 at 4:30 pm. Internet research has provided me with information and a video of symptoms pertaining to the ignition actuator switch and pin. This video shows exact symptoms of my car and also how to replace switch. Please advise on recall information replacement or a potential safety problem being evaluated for recall. [xxx] information redacted pursuant to the Freedom Of Information Act (FOIA), 5 U.S.C. 552(B)(6).
- Santee, CA, USA
The contact owns a 2006 Chrysler PT CRUISER. The contact stated that while driving 35 mph, the vehicle stalled without warning. The contact was able to restart the vehicle after several minutes. The contact also stated that the windshield wipers were inoperable. The vehicle was taken to a dealer for diagnostic testing, but the cause of the failure was not determined. The failure was reported to the manufacturer. The failure and current mileage was 69,205.
- Dayton , OH, USA
Crank shaft movement (approx. 0.025) hammered oil seal from block. Root cause is worn thrust bearing. Contacted Chrysler call center, employee's reaction and internet search indicates this is a common problem. Engine used in different makes and model years, mini vans Jeep....... I had the oil changed frequently and other routine maintenence performed.
- Newark, OH, USA
The contact owns a 2006 Chrysler PT CRUISER. The contact stated that while driving approximately 70 mph, a loud popping noise was heard from the front end of the vehicle. The vehicle was taken to a private mechanic where the contact was advised that there was oil leaking from the engine. The vehicle was taken to a dealer where it was diagnosed that the alternator belt, axle drive seal, camshaft seal, front main seal, and the serpentine belt needed to be replaced. The manufacturer was made aware of the failure. The vehicle was repaired but the failure recurred. The approximate failure mileage was 15,844 and the current mileage was 38,000.
- Sunfield , MI, USA
Since November 2012, my 2006 PT CRUISER's dashboard has occasionally gone crazy with all gauges (speed, gas, etc) going crazy and bouncing back and forth, all lights (engine, airbag, brake, etc) lighting up at the same time. At that time, it did not affect the engine. On March 15, 2013, the car died suddenly while pulling out into an intersection after being stopped at a red light. The gauges and lights had previously been going crazy. The car restarted without a problem. I drove the car to the Chrysler dealership where it was purchased immediately. The mechanic could not recreate the issue and did a computer update. After picking the car up from the dealership on March 22, 2013, again the gauges and lights starting going off and the car started to stall and the engine sputtered. I was in stop and go traffic. When stopped, the car would not immediately accelerate and it threatened to quit numerous times. I had to put my warning lights on to avoid being hit by the truck behind me. I immediately drove the car home and took it back to the dealership the following week. After another week, the mechanic was finally able to recreate the problem with the lights and gauges but did not experience the stalling or intermittent lack of acceleration. The car is still at the dealership and he is unable to determine the cause of the problem. He suggests replacing the dashboard cluster but is not sure if this will fix the problem. After reading other customer complaints that replacing the dashboard cluster did not remedy the same problem in other PT CRUISER, I am not confident that this is the solution to the problem. I would appreciate Chrysler responding to this issue that many 2006 PT CRUISER owners are experiencing. The problem seems too prevalent to ignore and having a car die suddenly in the middle of traffic is a dangerous thing.
- Greenville, SC, USA
Driving on expressway all the dashlights suddenly came on and the gauges started bouncing back and forth. All went back to normal for approx 10 mls and then started all over again, this time the engine died, after coming to a stop, turning everything off, it restarted. That was my first incident since then it has happened 3 more times in different driving situations.the mechanic can not reproduce the problem when he has it, and no codes are showing, do not feel very safe in vehicle anymore.
- Commerce , GA, USA
The contact owns a 2006 Chrysler PT CRUISER. The contact stated that the check engine warning light was illuminated. The contact took the vehicle to the dealer several times and was told that there was nothing wrong with the vehicle. The contact eventually took the vehicle to a mechanic and was told that the 02 sensor needed to be replaced. In addition, the controls that adjusted the front driver's seat would fracture continuously and was replaced twice. The failure mileage was unknown, but the current mileage was 78,000. Updated 01/18/13 updated 1/28/2013
- Chesepeake, VA, USA
My wife and I obtained a 2006 PT CRUISER from her father in 2008 with 12,980 miles on the odometer. In 4 years we've added about 12,000 miles. Starting last winter, both while being driven at city speeds (30-45 mph) and while idling, this 2006 PT CRUISER has periodically had a problem with the lights and gauges on the instrument panel. The needles all simultaneously switch back and forth rapidly, then go to the off position. The panel lights turn off at the same time, then after a few seconds to a few minutes, the panel returns to normal. Prior to last Friday, 10/12/2012, these incidents had not presented a danger or interfered with driving. However, on Friday, my wife was driving the car in heavy traffic, and this time the panel went haywire as described before, but the car suddenly lost all engine power. The car would not respond to her pressing the accelerator, and she was forced to coast to a slow roll in the 40 mph traffic! then, the engine reengaged suddenly and the car surged forward when she wasn't expecting it. She refuses to drive it again. Our local Chrysler service tech seemed to be completely unfamiliar with this problem when I described it to him, and a call to Chrysler Corp llc proved useless. A cursory investigation online turns up dozens of this exact complaint over the past 5 or 6 years, and virtually all of them indicate a number of attempted solutions, including replacing the battery, the vacuum hoses, the wiring harness, the fuses, or the instrument cluster, and none of these apparently eliminate the problem. Is this as common a complaint as it appears to be" if so, how can it be resolved"
- Ypsilanti, MI, USA
The contact owns a 2006 Chrysler PT CRUISER. The contact stated that while driving at various speeds the vehicle would shake violently and exhibit a rumbling noise. The vehicle was taken to a dealer who diagnosed that the motor mounts needed to be replaced. The manufacturer was not made aware of the failure. The vehicle was not repaired. The failure mileage was 55,000 and the current mileage was 57,600. Updated 10/17/12 the vehicle was repaired at a cost of $ 3,000. Updated 10/22/12
- Auburn, CA, USA
Owned this car approx. 3 months with problems from day 1. first week took in for 3 front end alignments, car always pulled to the right, problem never fixed. After one month when summer arrived no cold air, had to have evaporator replaced $1,000, car in shop for 2 weeks, air still not blowing cold. Replaced low pressure switch, high end switch, pressure line, still no cold air, problem was never resolved. Would idle real hard at stops. Told it was a broken motor mount, replaced $150. Car overheated, replaced thermostat, still overheating, could not figure out why...finally the turbo engine blew on the 3 month anniversary of owning this car. Had to call bank to volunteer a surrender due to cost of replacing engine. Car dealer was no help, just told me there was not a recall or warranty on this vehicle. Called Chrysler and was told it was dealers responsibility. Wow, I will never own a Chrysler again, this was the first and definitely the last!
- Kingman, AZ, USA
Driving on interstate my dash lights/gauges went crazy (on/off, on/off). Finally went back to normal. Then in Dec. I went out to start it & nothing, tried to jump it & nothing...end up buying new battery & it started right up. This month (May 10 2012) was driving to an appt. & dash lights all came on & then engine quit, pulled off road, turned key to off & back on (car started right up), no more trouble that day. May 13 2012 driving & dash lights would all come on & then go off several times, the engine didn't stop this time. What if I am on interstate again & it does this, injuring someone. I'm not happy with Chrysler, there is no recall. Mileage is 71, 200. Apparently problem seems to be in the steering column, you just shake it or turn key off/on it quits. Don't kav the money to fix & mechanic can't get it to this when he has car.
- Cincinnati, OH, USA
- Florissant , MO, USA