Some 2024 Mustang GT vehicles built on 15-Nov-2023 and through 26-Mar-2024 may exhibit an inoperative auto start-stop feature. This may be due to the body control module (BCM) software. To correct this concern, reprogram the BCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 15604 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. Vehicles built on or before 14-Nov-2023 are not equipped with auto start-stop and the Workshop Manual (WSM) is in the process of being updated with this information.
