2020 Hyundai Ioniq Hybrid
TSBs (Technical Service Bulletins)
Technical Service Bulletins (TSBs) for the 2020 Ioniq Hybrid are official communications between Hyundai & their dealerships that describe processes for troubleshooting or fixing certain common problems. All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
-
TSB #218/231 amend
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Read More »
-
TSB #22-ST-005H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Read More »
-
TSB #22-ST-005H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Read More »
-
TSB #21-ST-003H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. Read More »
-
TSB #20-ST-001H-2
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. Read More »
-
TSB #20-ST-003H-1
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #20-ST-001H-1
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. Read More »
-
TSB #20-ST-003H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #20-ST-003H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #20-ST-001H-1
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. Read More »
-
TSB #21-BR-002H
This bulletin provides best practice recommendations when performing brake service procedures. Read More »
-
TSB #20-BR-002H
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. Read More »
-
TSB #23-BR-001H
When servicing any of the specified vehicles below with the corresponding DTCs, C2416, a??Motor Short or Open a?? LH (EPB)a?? or C2417 a??Motor Short or Open a?? RH (EPB)a??, follow the step-by-step procedures in this bulletin. Read More »
-
TSB #21-BR-004H
This bulletin describes the procedure to update the EPB (Electronic Parking Brake) ECU to revise the logic of setting DTC C2416, a??Motor Short or Open a?? LH (EPB)a?? or C2417 a??Motor Short or Open a?? RH (EPB)a?? from vibrations while ... Read More »
-
TSB #23-EM-005H
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services. Read More »
-
TSB #22-EM-010H
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. Read More »
-
TSB #22-HC-001H
If you are servicing an applicable model with Hybrid Drive Motor (Traction Motor) improper operation or any DTC listed in the related shop manual, Motor Control System, refer to the shop manual for diagnosis. Read More »
-
TSB #21-EM-004H
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required ... Read More »
-
TSB #21-EM-003H
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. Read More »
-
TSB #23-01-072H
This bulletin provides the procedure to update the Hybrid Control Unit (HCU) / Low DC/DC Converter (LDC) software logic to eliminate internal P-DTCs (that are not viewable) in certain 2019-2021MY IONIQ Hybrid (AE HEV) and 2021MY IONIQ ... Read More »
-
TSB #23-BE-007H
This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundaia??s Navigation Updates page. Read More »
-
TSB #22-HC-001H
If you are servicing an applicable model with Hybrid Drive Motor (Traction Motor) improper operation or any DTC listed in the related shop manual, Motor Control System, refer to the shop manual for diagnosis. Read More »
-
TSB #21-BE-004H
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message a??Phone Not Responding. Please reconnect it and try againa?? will appear on the radio screen. Read More »
-
TSB #20-BE-014H
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message a??Phone Not Responding. Please reconnect it and try againa?? will appear on the radio screen. Read More »
-
TSB #20-01-041H
Certain 2020 MY Ioniq Plug-In (AE PHEV), Ioniq Hybrid (AE HEV), and 2020 - 2021 MY Sonata Hybrid (DN8 HEV) may exhibit a check engine light ON with a DTC P17A0 (Navigation Control Module). Read More »
-
TSB #20-01-039H
This bulletin provides information and procedures for collecting OBD a??In Use Monitor Performance Ratioa?? (IUMPR) data on certain 2019-2021MY vehicles at California dealers. Read More »
-
TSB #20-01-035H
This bulletin describes the procedure to replace the fuse cover that may be out of specification. Read More »
-
TSB #20-ST-001H-1
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. Read More »
-
TSB #20-ST-003H
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #23-01-072H
This bulletin provides the procedure to update the Hybrid Control Unit (HCU) / Low DC/DC Converter (LDC) software logic to eliminate internal P-DTCs (that are not viewable) in certain 2019-2021MY IONIQ Hybrid (AE HEV) and 2021MY IONIQ ... Read More »
-
TSB #20-BD-014H
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
-
TSB #24-BD-001H
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. Read More »
-
TSB #23-BD-002H
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
-
TSB #24-BD-001H
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. Read More »
-
TSB #23-BD-007H
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. Read More »
-
TSB #22-GI-006H
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail ... Read More »
-
TSB #20-SS-004H
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. Read More »
-
TSB #20-SS-002H(1)
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Read More »
-
TSB #20-SS-004H
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. Read More »
-
TSB #20-SS-002H(1)
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Read More »
-
TSB #21-EM-004H
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required ... Read More »
-
TSB #21-BR-002H
This bulletin provides best practice recommendations when performing brake service procedures. Read More »
-
TSB #21-BE-004H
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message a??Phone Not Responding. Please reconnect it and try againa?? will appear on the radio screen. Read More »
-
TSB #21-EM-003H
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. Read More »
-
TSB #20-01-039H
This bulletin provides information and procedures for collecting OBD a??In Use Monitor Performance Ratioa?? (IUMPR) data on certain 2019-2021MY vehicles at California dealers. Read More »
-
TSB #20-ST-001H-2
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. Read More »
-
TSB #20-ST-003H-1
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #20-BD-014H
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
-
TSB #20-BD-007H-1
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products. Read More »
-
TSB #23-BE-007H
This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundaia??s Navigation Updates page. Read More »
-
TSB #21-BR-002H
This bulletin provides best practice recommendations when performing brake service procedures. Read More »
-
TSB #20-ST-003H-1
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. Read More »
-
TSB #20-BD-014H
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »