2010 Mazda MAZDA3
TSBs (Technical Service Bulletins)
Technical Service Bulletins (TSBs) for the 2010 MAZDA3 are official communications between Mazda & their dealerships that describe processes for troubleshooting or fixing certain common problems. All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-22
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3? even when driving straight on a flat road. Read More »
-
TSB #MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. Read More »
-
TSB #02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. Read More »
-
TSB #02-009-16-3155
Some customers may complain that the steering wheel is off center more than 3" even when driving straight on a flat road. Read More »
-
TSB #RF-13-04
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. Read More »
-
TSB #02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3? even when driving straight on a flat road. Read More »
-
TSB #02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. Read More »
-
TSB #02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #02-004-14-2976
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE. Read More »
-
TSB #02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. Read More »
-
TSB #02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3? EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. Read More »
-
TSB #SB-06-003-10
MAZDA: STEERING COLUMN SLIGHTLY MOVES IN OR OUT TELESCOPICALLY. SOME VEHICLES MAY EXHIBIT A SLIGHT IN OR OUT MOVEMENT OF THE STEERING WHEEL WHEN IT IS PUSHED OR PULLED, EVEN WITH THE STEERING WHEEL RELEASE LEVER PROPERLY LOCKED. Read More »
-
TSB #02-004-22a
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #02-004-22
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #02-002-20-3651
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #02-005-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #0200416
SHOCK ABSORBER REPLACEMENT GUIDELINES Read More »
-
TSB #02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #0200416
SHOCK ABSORBER REPLACEMENT GUIDELINES Read More »
-
TSB #02-002-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. Read More »
-
TSB #04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may ... Read More »
-
TSB #00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program. Read More »
-
TSB #04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may ... Read More »
-
TSB #04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY ... Read More »
-
TSB #04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY ... Read More »
-
TSB #04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may ... Read More »
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-22
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-20-3689
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #04-001-20-3672
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may ... Read More »
-
TSB #00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. Read More »
-
TSB #SB-04-002-13
MAZDA: THE ABS WARNING LIGHT COMES ON AND ABS MOTOR MONITOR SIGNAL FAILS TO CORRESPOND TO ABS HU/CM ON/OFF SIGNAL AND HAPPENS IN AREA WHERE THERE IS HIGH AMBIENT TEMPERATURES AND HUMIDITY. MODEL 2010-2011 MAZDA3. Read More »
-
TSB #04-001-19-3556
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. Read More »
-
TSB #04-002-14-2879
SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. Read More »
-
TSB #SB-04-002-13
MAZDA: THE ABS WARNING LIGHT COMES ON AND ABS MOTOR MONITOR SIGNAL FAILS TO CORRESPOND TO ABS HU/CM ON/OFF SIGNAL AND HAPPENS IN AREA WHERE THERE IS HIGH AMBIENT TEMPERATURES AND HUMIDITY. MODEL 2010-2011 MAZDA3. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #01-016-16-3220
THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. Read More »
-
TSB #01-015-16-3234
SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P2096:00 (TARGET A/F FEEDBACK SYSTEM TOO LEAN). THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO ELIMINATE THE CONCERN, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED. Read More »
-
TSB #1080M
IF AN ENGINE ASSEMBLY IS REPLACED AFTER A CATASTROPHIC INTERNAL MECHANICAL FAILURE, CLEAN THE INTAKE MANIFOLD INTERNALLY BEFORE INSTALLING A REPLACEMENT ENGINE ASSEMBLY. Read More »
-
TSB #1080M
IF AN ENGINE ASSEMBLY IS REPLACED AFTER A CATASTROPHIC INTERNAL MECHANICAL FAILURE, CLEAN THE INTAKE MANIFOLD INTERNALLY BEFORE INSTALLING A REPLACEMENT ENGINE ASSEMBLY. Read More »
-
TSB #1102M
WORKSHOP MANUAL EVAP SYSTEM LEAK INSPECTION USING THE M-MDS HAS BEEN DISCONTINUED FOR SOME MODELS. INSTEAD, THE WORKSHOP MANUAL EVAP SYSTEM LEAK INSPECTION USING EVAP LEAK TESTER WILL BE USED TO TROUBLESHOOT EVAP SYSTEM LEAKS. Read More »
-
TSB #01-005-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-005-13-2738A
SOME VEHICLES MAY EXPERIENCE DIFFICULTY WITH ENGINE STARTING IN THE WINTER (CRANKS BUT NO START), BUT CAN BE STARTED USING THE DE-CHOKE MODE WITH NO DTC RECORDED. THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. Read More »
-
TSB #01-021-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-024-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-021-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-021-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-013-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-013-13-2791
SOME VEHICLES MAY EXHIBIT A SQUEAK NOISE FROM THE ENGINE COMPARTMENT WHEN THE VEHICLE STARTS MOVING AND/OR AT THE TIME OF TRANSMISSION SHIFTING. THIS IS CAUSED BY STICK-SLIP NOISE OCCURRING AT THE CONTACT SURFACES BETWEEN THE NO. Read More »
-
TSB #01-005-13BB
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-005-13-2738
SOME VEHICLES MAY EXPERIENCE DIFFICULTY WITH ENGINE STARTING IN THE WINTER (CRANKS BUT NO START), BUT CAN BE STARTED USING THE DE-CHOKE MODE WITH NO DTC RECORDED. THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. Read More »
-
TSB #01-021-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-021-12-2695B
SOME VEHICLES MAY EXHIBIT A SQUEAK NOISE FROM THE ENGINE COMPARTMENT WHEN THE VEHICLE STARTS MOVING AND/OR AT THE TIME OF TRANSMISSION SHIFTING. THIS IS CAUSED BY STICK-SLIP NOISE OCCURING AT THE CONTACT SURFACES BETWEEN THE NO. Read More »
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #SA-032-23a
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #SA-032-23
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #00-001-22
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-002-21
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. Read More »
-
TSB #01-006-21-3779a
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #MT-002-21
When programming a key or installing a Genuine Mazda Accessory Remote Engine Start system, you may encounter programming difficulty. Read More »
-
TSB #MT-001-21
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-005-20
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Engine Oil Consumption Inspection Guideline 1. Read More »
-
TSB #00-001-20-3689
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-002-19
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. Read More »
-
TSB #01-022-19-3657
There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. Read More »
-
TSB #MT-003-19
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Read More »
-
TSB #MT-002-19
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Read More »
-
TSB #04-003-18-3455
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #SSP99
2010 Mazda3 Dashboard Upper Panel Sticky Surface Warranty Extension Program ? Special Service Program (SSP) 99. Read More »
-
TSB #0100116
Engine Start /Stop Procedure with room fuse removed Read More »
-
TSB #0100216
PreMixed long life "FL22" Engine Coolant Read More »
-
TSB #SB-01-018-11
MAZDA: THERE IS A RATTLE NOISE FROM THE ENGINE DUE TO A STRETCHED TIMING CHAIN. *RM UPDATED 4/18/2012. *KB Read More »
-
TSB #SSP-87
MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DUE TO WEAR ON LOCK PIN HOLE IN VVT ROTOR OR BREAKAGE OF VVT CASE, LOUD TICKING NOISE (KNOCKING/RATTLE) IS HEARD, FROM TIMING COVER AND/OR VALVE (CYLINDER HEAD) COVER, WHEN ENGINE IS ... Read More »
-
TSB #MT-003-21
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Read More »
-
TSB #01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Read More »
-
TSB #MC-5409D
MAZDA: PARTS ORDER RESTRICTIONS FOR RECALL 5409D (2010 MAZDA3 EMISSION HARNESS) HAVE BEEN ELIMINATED. *PE Read More »
-
TSB #MT-002-19
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. Read More »
-
TSB #MT-002-21a
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #MT-002-21a
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. Read More »
-
TSB #01-013-15-3048
SOME CUSTOMERS MAY COMPLAIN THAT THE FUEL TANK IS DIFFICULT TO FILL UP. THIS CONCERN MAY BE CAUSED BY IMPROPER OPERATION OF THE NON-RETURN VALVE IN THE FUEL TANK (TEMPORARILY STUCK OPEN). Read More »
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-22
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #05-002-21-3854
Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except ... Read More »
-
TSB #CSP09
CSP09 - 2010-2013 - MAZDA3 2.5L CLUTCH REIMBURSEMENT PROGRAM (NO REPAIR WITH THIS PROGRAM) Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-20-3689
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. Read More »
-
TSB #RF-12-17
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION. Read More »
-
TSB #05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION. Read More »
-
TSB #05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION. Read More »
-
TSB #01-015-16-3234
SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P2096:00 (TARGET A/F FEEDBACK SYSTEM TOO LEAN). THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO ELIMINATE THE CONCERN, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED. Read More »
-
TSB #01-024-13-2824
SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P2096:00 (TARGET A/F FEEDBACK SYSTEM TOO LEAN). THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. Read More »
-
TSB #SB-01-014-09
MAZDA: ON SOME VEHICLES, WHEN THE ENGINE IS STARTED AFTER PARKING THE VEHICLE UNDER INTENSE SUNLIGHT, THE MALFUNCTION INDICATOR LIGHT (MIL) MAY ILLUMINATE WITH DTC P2183 (ECT SENSOR NO. Read More »
-
TSB #SA-032-23a
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #SA-032-23
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #09-016-23
Speedometer replacement procedure Read More »
-
TSB #SA-075-22
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #01-006-22
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #01-003/22
The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #01-006-21-3779b
Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #MT-002-21
When programming a key or installing a Genuine Mazda Accessory Remote Engine Start system, you may encounter programming difficulty. Read More »
-
TSB #MT-001-21
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #MT-001-21
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #01-005-21-3778
The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #01-006-21-3779
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #09-036-20-3756
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH??A? hands-free unit or text messaging related concerns. Read More »
-
TSB #MT-001-20
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #09-003-20-3671
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #SA-029-19
Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. Read More »
-
TSB #01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #MT-004-18
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #MT-004-18
ELECTRICAL CONCERN AND/OR MULTIPLE DTC'S DUE TO AFTERMARKET DEVICE: If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored... Read More »
-
TSB #MT-004-18
If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Read More »
-
TSB #01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. Read More »
-
TSB #MT-017-17
If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Read More »
-
TSB #09-001-17-3296b
When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. Read More »
-
TSB #SSPA9
Gap between Instrument Panel and Information Display Warranty Extension Program - Special Service Program (SSP) A9 Read More »
-
TSB #1107M
WHEN PERFORMING ELECTRICAL REPAIRS ON THE INSTRUMENT PANEL HARNESS (E.G. 2010 MAZDA3 DASHBOARD UPPER PANEL STICKY SURFACE SSP99), TAKE CAUTION WHEN RE-CONNECTING CONNECTORS 0918-501 AND 0920-403. Read More »
-
TSB #SA289
IF YOU ENCOUNTER THE HAZARD WARNING LIGHTS STAYING ON AFTER A DASH REPAIR, YOU MAY HAVE CROSSED THE HAZARD WARNING SWITCH CONNECTOR WITH ANOTHER CONNECTOR, SUCH AS THE BLUETOOTH MICROPHONE CONNECTOR. Read More »
-
TSB #1099M
WHEN REPROGRAMMING A CONTROL MODULE, ALWAYS USE THE GR-8 BATTERY MANAGEMENT SYSTEM POWER SUPPLY MODE. IF NOT USED, THE CONTROL MODULE REPROGRAMMING MAY FAIL DUE TO A WEAK VEHICLE BATTERY. Read More »
-
TSB #SA285
OVER THE PAST TWO WEEKS, AN INCREASING NUMBER OF IPHONE SE EARLY ADOPTERS HAVE REPORTED AUDIO ISSUES WITH BLUETOOTH PHONE CALLS WHEN THE SMARTPHONE IS PAIRED WITH A VEHICLE OR WIRELESS HEADSET. Read More »
-
TSB #MTI_1111
When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another for testing. Read More »
-
TSB #0900916
HandsFree bluetooth module and/or text messaging troubleshooting procedure Read More »
-
TSB #0100116
Engine Start /Stop Procedure with room fuse removed Read More »
-
TSB #08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. Read More »
-
TSB #SB-09-034-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-006-21-3779a
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #MT-004-18
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #0100416
Battery Maintenance Read More »
-
TSB #0100516
Battery test procedure requirements using the GR81291 Read More »
-
TSB #RF-11-12R
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #SSP99_SSPA9
SSP99 - 2010 MAZDA3 - DASHBOARD UPPER PANEL STICKY SURFACE: For certain 2010 Mazda3 vehicles, the warranty coverage for dashboard replacement for sticky surface condition only is extended to 10 years (120 months) from the original ... Read More »
-
TSB #09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #SSPA0
2009-2013 Mazda6 Dashboard Upper Panel (Crash Pad) Sticky Surface Warranty Extension Program ? Special Service Program (SSP) A0 - Mazda has now opened Warranty Extension SSPA0 to subject vehicles in all states. Read More »
-
TSB #09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is? 2017 Mazda North American Operations, U.S.A. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #09018173351
Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #09-016-23
Speedometer replacement procedure Read More »
-
TSB #09-024-22
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. Read More »
-
TSB #0900716
Speedometer replacement procedure Read More »
-
TSB #SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB. Read More »
-
TSB #01-005-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #0901316
Excessive condensation or water within the headlamp assembly caustion Read More »
-
TSB #MTI_1031
Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device. Read More »
-
TSB #09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #1066M
SOME CUSTOMERS MAY COMPLAIN ABOUT IMPROPER OPERATION OF THE AUTO-DIMMING MIRROR. THIS MAY BE CAUSED BY AN OBSTRUCTION OF THE FRONT AND/OR REAR LIGHT SENSOR(S) (E.G. HANGING A PARKING PERMIT FROM THE MIRROR). Read More »
-
TSB #0800116
Passenger fAirbag deactivation (PAD) indicator light illumination Read More »
-
TSB #SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM Read More »
-
TSB #09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE ... Read More »
-
TSB #09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #09-001-17-3296b
When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. Read More »
-
TSB #09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Read More »
-
TSB #09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. Read More »
-
TSB #09-049-14-2980
WHEN DEALING WITH CUSTOMER COMPLAINTS OF EXCESSIVE CONDENSATION AND/OR WATER WITHIN THE HEADLAMP UNIT, FIRST DETERMINE IF ALL THE BULB SOCKETS ARE PRESENT AND CORRECTLY INSTALLED. IN MOST CASES YOU WILL FIND THAT THE BULB SEAL NO. Read More »
-
TSB #SB-09-003-13
MAZDA: ON VARIOUS MODEL YEARS AND MODEL VEHICLES, THE HEADLAMP ASSEMBLY WOULD HAVE EXCESSIVE CONDENSATION OR WATER WITHIN AND SHOULD BE CHECKED AND REPLACED, IF NECESSARY FOR CORRECT INSTALLATION. Read More »
-
TSB #09-005-11
MAZDA: THERE IS POSSIBLE EXCESSIVE CONDENSATION OR WATER INSIDE THE HEADLAMP UNIT ON MANY MAZDA MODELS. *RM Read More »
-
TSB #SB-09-003-13
MAZDA: ON VARIOUS MODEL YEARS AND MODEL VEHICLES, THE HEADLAMP ASSEMBLY WOULD HAVE EXCESSIVE CONDENSATION OR WATER WITHIN AND SHOULD BE CHECKED AND REPLACED, IF NECESSARY FOR CORRECT INSTALLATION. Read More »
-
TSB #SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM Read More »
-
TSB #09-001-17
Excessive condensation or water within the headlamp assembly caustion. Read More »
-
TSB #0900316
Condensation/Fog in front and rear combination lights Read More »
-
TSB #09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE ... Read More »
-
TSB #09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE ... Read More »
-
TSB #09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. Read More »
-
TSB #09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. Read More »
-
TSB #SA289
IF YOU ENCOUNTER THE HAZARD WARNING LIGHTS STAYING ON AFTER A DASH REPAIR, YOU MAY HAVE CROSSED THE HAZARD WARNING SWITCH CONNECTOR WITH ANOTHER CONNECTOR, SUCH AS THE BLUETOOTH MICROPHONE CONNECTOR. Read More »
-
TSB #09-025-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #SA-039-23a
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #SA-040-21
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #MT-003-21
Some vehicles may experience exterior trim heat damage when parked near a glass building. This may be caused by the suns reflection. Read More »
-
TSB #MTI_1034
THIS ARTICLE PROVIDES HVAC HEATER/DEFROSTER OPERATING TIPS USING MODE SELECTOR DIAL. THIS INCLUDES THE USE OF INTERMEDIATE POSITIONS. Read More »
-
TSB #MTI_1034
THIS ARTICLE PROVIDES HVAC HEATER/DEFROSTER OPERATING TIPS USING MODE SELECTOR DIAL. THIS INCLUDES THE USE OF INTERMEDIATE POSITIONS. Read More »
-
TSB #SSPB3
Subject: ** UPDATE** - Takata Inflator Special Service Program (Extended Warranty) Special Service Program SSPB3: In December 2017 Special Service Program SSPB3 - Takata Inflator Extended Warranty was announced. Read More »
-
TSB #08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. Read More »
-
TSB #08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. Read More »
-
TSB #MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. Read More »
-
TSB #0800116
Passenger fAirbag deactivation (PAD) indicator light illumination Read More »
-
TSB #08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. Read More »
-
TSB #SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE Read More »
-
TSB #08-003-17-3345
Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. Read More »
-
TSB #MDE-2004
MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PROVIDED REGARDING THE SELLING AND IMPORTING OF COUNTERFEIT AIRBAGS MANUFACTURED IN CHINA, INSTALLING IN SOME VEHICLES. MODELS 2004, 2010-2012 MAZDA3. Read More »
-
TSB #SB-2010
MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION REGARDING IMPORTING AND SELLING OF COUNTERFEIT AIRBAGS MANUFACTURED IN CHINA AND SOME 2004, 2010-2012 MAZDA3 VEHICLES MAY HAVE THEM INSTALLED. Read More »
-
TSB #MD-04-10
MAZDA: INFORMATION REGARDING THE INSTALLATION OF COUNTERFEIT AIR BAGS, IF INSTALLED BY INDEPENDENT SHOP, OR IS OEM FROM FACTORY OR DEALER INSTALLED AND TO CONTACT DEALERS OR MANUFACTURER IF CONCERN OR UNSURE OF AIR BAGS IN VEHICLES. Read More »
-
TSB #SB-08-003-09
MAZDA: THE 5 DOOR HAS A RETRACTOR(A) FOR THE REAR SEAT CENTER BELT(B) INSIDE THE SEAT BACK(C). IF A STANDARD TYPE RETRACTOR WAS INSTALLED, YOU WOULD NOT BE ABLE TO PUT THE SEAT BACK TO THE UPRIGHT POSITION IF THE SEAT BACK WAS FOLDED ... Read More »
-
TSB #SB-08-003-09
MAZDA: THE 5 DOOR HAS A RETRACTOR(A) FOR THE REAR SEAT CENTER BELT(B) INSIDE THE SEAT BACK(C). IF A STANDARD TYPE RETRACTOR WAS INSTALLED, YOU WOULD NOT BE ABLE TO PUT THE SEAT BACK TO THE UPRIGHT POSITION IF THE SEAT BACK WAS FOLDED ... Read More »
-
TSB #SA-039-23a
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #SA-039-23
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #SA-008-22a
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #SA-008-22
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. Read More »
-
TSB #SSP99_SSPA9
SSP99 - 2010 MAZDA3 - DASHBOARD UPPER PANEL STICKY SURFACE: For certain 2010 Mazda3 vehicles, the warranty coverage for dashboard replacement for sticky surface condition only is extended to 10 years (120 months) from the original ... Read More »
-
TSB #09-014-18-3443a
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #09-014-18-3443
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #09-001-17-3296b
When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. Read More »
-
TSB #09-050-16-3243
SOME CUSTOMERS MAY COMPLAIN ABOUT THE DASHBOARD UPPER PANEL JUST ABOVE THE INFORMATION DISPLAY (A) IS WARPING, GENERATING A GAP (B). REPLACE DASHBOARD. Read More »
-
TSB #1098M
WHEN REMOVING PARTS FROM A VEHICLE, TAKE CAUTION OF THIS SYMBOL "R". FAILING TO REPLACE THE NON-REUSABLE PART MAY CAUSE A SYSTEM FAILURE. Read More »
-
TSB #1098M
WHEN REMOVING PARTS FROM A VEHICLE, TAKE CAUTION OF THIS SYMBOL "R". FAILING TO REPLACE THE NON-REUSABLE PART MAY CAUSE A SYSTEM FAILURE. Read More »
-
TSB #09-027-16-3197
SOME VEHICLES MAY EXHIBIT RUST OR BLISTERING ON THE INNER SIDE OF THE LIFTGATE/TRUNK LID, WHERE IT CONTACTS THE WEATHERSTRIP (AS SHOWN BELOW). Read More »
-
TSB #0400416
Brake noise, judder and dragging diagnosis and servicing Read More »
-
TSB #SSP99
Mazda Motor Corporation is extending the warranty coverage for dashboards on certain 2010 Mazda3 vehicles produced from October 7, 2008 through April 28, 2010. Read More »
-
TSB #MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. Read More »
-
TSB #09-046-17-3401
DASHBOARD UPPER PANEL WARPING. This TSB has been superseded to SSPA9. Read More »
-
TSB #09-014-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #09-014-14-2880
SOME VEHICLES MAY EXHIBIT RUST ON THE BOTTOM OF THE REAR DOOR GLASS GUIDE (A) FROM CONTACT WITH THE REAR BELTLINE MOLDING (B). THIS IS CAUSED BY A VIBRATION WHILE DRIVING. Read More »
-
TSB #SB-09-021-10
MAZDA: UNABLE TO OPEN FRONT DOORS IN UNLOCKED POSITION. THE DRIVER'S OR FRONT PASSENGER'S DOOR WILL NOT OPEN, EVEN THOUGH THE DOOR IS IN THE UNLOCKED POSITION. Read More »
-
TSB #SA-050-17
CAUTION: At no point during the repair for Recall 9916H (LIFTGATE STAY DAMPER SAFETY RECALL) should "Vise-Grips" or other similar tools be used to hold the lift gate stay dampers. Use only the tools specified in the recall. Read More »
-
TSB #SB-09-051-10
MAZDA: LIFTGATE DOES NOT OPEN PROPERLY OR CLOSE PROPERLY. WHEN USING THE ELECTRONIC OPENER, THE LIFTGATE WILL OPEN PARTIALLY AND LOCK. *RM Read More »
-
TSB #SA-050-17
CAUTION: At no point during the repair for Recall 9916H (LIFTGATE STAY DAMPER SAFETY RECALL) should "Vise-Grips" or other similar tools be used to hold the lift gate stay dampers. Use only the tools specified in the recall. Read More »
-
TSB #SB-09-021-10
MAZDA: UNABLE TO OPEN FRONT DOORS IN UNLOCKED POSITION. THE DRIVER'S OR FRONT PASSENGER'S DOOR WILL NOT OPEN, EVEN THOUGH THE DOOR IS IN THE UNLOCKED POSITION. Read More »
-
TSB #SB-09-051-10
MAZDA: LIFTGATE DOES NOT OPEN PROPERLY OR CLOSE PROPERLY. WHEN USING THE ELECTRONIC OPENER, THE LIFTGATE WILL OPEN PARTIALLY AND LOCK. *RM Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #09-039-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-002-20
New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010. Read More »
-
TSB #SB-02-001-12
MAZDA: TPMS WARNING LIGHT ILLUMINDATED. THIS MAY BE CAUSED BY DAMAGE TO THE VALVE NUT AND/OR VALVE STEM OF THE WHEEL. *KB Read More »
-
TSB #SA-011-24
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-002-20
New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010. Read More »
-
TSB #02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint ... Read More »
-
TSB #02-003-18-3501
Some vehicles may have aluminum alloy type wheel(s) with one of the following paint damage conditions shown in the sample photos below. The damage extends to the front surface of the aluminum wheel partly or entirely. Read More »
-
TSB #02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint ... Read More »
-
TSB #02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT ... Read More »
-
TSB #0200216
STAINS APPEAR ON WHEELS Read More »
-
TSB #02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint ... Read More »
-
TSB #02-008-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #09-034-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #09-034-12-2708A
SOME VEHICLES MAY EXHIBIT A NOISE FROM THE MAP LIGHT (A) WHILE DRIVING OR AT IDLE. THIS IS CAUSED BY ONE OF TWO THINGS. 1. Read More »
-
TSB #MT-002-21
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. Read More »
-
TSB #09-025-21-3824
This service bulletin provides information regarding the proper use of the driver??A?A?s floor mat to avoid any potential interference with the foot pedals. Read More »
-
TSB #SA-041-21
Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories. The links provided below can be used for quick access: For 2016 models and newer: NOTE: Instructions are found under the "Attachments" section ... Read More »
-
TSB #MT-002-21
When programming a key or installing a Genuine Mazda Accessory Remote Engine Start system, you may encounter programming difficulty. Read More »
-
TSB #MT-001-21
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #07-001-21-3775
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #09-006-20-3673a
When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #MT-001-20
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #09-006-20-3673
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #02-002-20-3651
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #09-003-20-3671
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #MT-002-19
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. Read More »
-
TSB #07-002-19-3616a
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #01-022-19-3657
There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. Read More »
-
TSB #SA-029-19a
The database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download. Read More »
-
TSB #07-002-19-3616
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #SA-029-19
Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. Read More »
-
TSB #SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #09-007-19-3564a
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH? hands-free unit or text messaging related concerns. Read More »
-
TSB #00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #09-005-19-3562
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #09-007-19-3564
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH? hands-free unit or text messaging related concerns. Read More »
-
TSB #09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Read More »
-
TSB #09-001-19-3553
When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as ... Read More »
-
TSB #00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. Read More »
-
TSB #09-014-18-3443a
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #09-020-18-3458b
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH? hands-free unit or text messaging related concerns. Read More »
-
TSB #09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #MT-004-18
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Read More »
-
TSB #MT-004-18
ELECTRICAL CONCERN AND/OR MULTIPLE DTC'S DUE TO AFTERMARKET DEVICE: If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored... Read More »
-
TSB #09-020-18-3458a
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH? hands-free unit or text messaging related concerns. Read More »
-
TSB #09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Read More »
-
TSB #09-023-18-3475
When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as ... Read More »
-
TSB #05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. Read More »
-
TSB #MT-004-18
If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Read More »
-
TSB #00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. Read More »
-
TSB #MT-017-17
If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Read More »
-
TSB #SSPA9
Gap between Instrument Panel and Information Display Warranty Extension Program - Special Service Program (SSP) A9 Read More »
-
TSB #00-004-16-3237
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNER?S MANUAL. Read More »
-
TSB #09-013-16-3161
WHEN DEALING WITH CUSTOMER COMPLAINTS OF EXCESSIVE CONDENSATION AND/OR WATER WITHIN THE HEADLAMP UNIT, FIRST DETERMINE IF ALL THE BULB SOCKETS ARE RESENT AND CORRECTLY INSTALLED. IN MOST CASES YOU WILL FIND THAT THE BULB SEAL NO. Read More »
-
TSB #09-009-16-3150A
SOME VEHICLES MAY EXHIBIT BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING RELATED CONCERNS. TO IMPROVE THE HANDLING OF BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING CUSTOMER CONCERNS, MAZDA CRE-ATED A SPECIAL SERVICE AND PARTS EXCHANGE PROGRAM ... Read More »
-
TSB #MTI_1111
WHEN INSTALLING A NAVIGATION SD CARD, CONFIRM THAT THE CARD IS UNLOCKED. ALSO, MAZDA DOES NOT RECOMMEND SWAPPING NAVIGATION SYSTEM SD CARDS FROM ONE VEHICLE TO ANOTHER FOR TESTING. Read More »
-
TSB #MTI_1111
WHEN INSTALLING A NAVIGATION SD CARD, CONFIRM THAT THE CARD IS UNLOCKED. ALSO, MAZDA DOES NOT RECOMMEND SWAPPING NAVIGATION SYSTEM SD CARDS FROM ONE VEHICLE TO ANOTHER FOR TESTING. Read More »
-
TSB #MTI_1034
This article provides HVAC heater/defroster operating tips using Mode selector dial. This includes the use of intermediate positions. Read More »
-
TSB #MTI_1111
When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another for testing. Read More »
-
TSB #MTI_1031
SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE. Read More »
-
TSB #MTI_1032
SOME CUSTOMERS MAY COMPLAIN ABOUT A RATTLE TYPE NOISE COMING FROM THE REAR OF THE VEHICLE WHEN DRIVING ON ROUGH ROADS. THIS MAY BE CAUSED BY A LOOSE SPARE TIRE JACK. Read More »
-
TSB #MTI_1031
SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE Read More »
-
TSB #MTI_1032
Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack. Read More »
-
TSB #0901216
Paint damage Mazda pocket paint guide Read More »
-
TSB #0200416
SHOCK ABSORBER REPLACEMENT GUIDELINES Read More »
-
TSB #0100216
PreMixed long life "FL22" Engine Coolant Read More »
-
TSB #SSP99
Mazda Motor Corporation is extending the warranty coverage for dashboards on certain 2010 Mazda3 vehicles produced from October 7, 2008 through April 28, 2010. Read More »
-
TSB #01-003-15-3014
USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. Read More »
-
TSB #09-038-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #09-038-14-2957
SOME CUSTOMERS MAY COMPLAIN ABOUT EITHER OF THE FOLLOWING CONCERNS:A.THE DASHBOARD UPPER PANEL IS STICKY. B.THE DASHBOARD UPPER PANEL JUST ABOVE THE INFORMATION DISPLAY (A) IS WARPING, GENERATING A GAP (B). Read More »
-
TSB #09-025-14-2925A
SOME VEHICLES MAY EXHIBIT A CRACKING NOISE ORIGINATED AT THE POSITIONING PINS NEAR THE TOP CORNERS OF THE WIND-SHIELD AND/OR REAR WINDOW WHEN DRIVING ON UNEVEN ROAD SURFACE. Read More »
-
TSB #00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. Read More »
-
TSB #09-025-14-2925
SOME VEHICLES MAY EXHIBIT A CRACKING NOISE ORIGINATED AT THE POSITIONING PINS NEAR THE TOP CORNERS OF THE WINDSHIELD AND/OR REAR WINDOW WHEN DRIVING ON UNEVEN ROAD SURFACE. Read More »
-
TSB #09-023-14-2924
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. Read More »
-
TSB #03-001-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #03-001-14-2919
SOME NEW VEHICLES MAY EXHIBIT OIL SEEPAGE UNDERNEATH THE BEARING BRACKET (A) ON THE RIGHT SIDE OF THE JOINT SHAFT. Read More »
-
TSB #02-008-13-2811
SOME VEHICLES MAY EXHIBIT A SQUEAKING OR KNOCKING NOISE FROM THE REAR OF THE VEHICLE WHEN PASSING OVER A BUMP. THIS IS CAUSED BY DUST ENTERING BETWEEN THE REAR STABILIZER BUSHING AND STABILIZER BAR, WHICH WEARS DOWN THE BUSHING. Read More »
-
TSB #04-002-13-2812
SOME VEHICLES (EQUIPPED WITH DSC) MAY EXPERIENCE THE ABS WARNING LIGHT ON WITH DTCS C0020:1C AND U0415:92 STORED IN MEMORY. C0020:71 MAY ALSO BE STORED. Read More »
-
TSB #SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. Read More »
-
TSB #09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER?S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. Read More »
-
TSB #02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. Read More »
-
TSB #02-005-12-2717
SOME VEHICLES MAY EXHIBIT A RATTLE TYPE NOISE COMING FROM THE REAR STABILIZER WHEN DRIVING OVER A ROAD BUMP. THIS NOISE MAY BE CAUSED BY A LOOSE REAR STABILIZER CONTROL LINK. Read More »
-
TSB #0900416
PROPER USAGE OF DRIVER'S FLOOR MAT. Read More »
-
TSB #09-020-18-3458b
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH? hands-free unit or text messaging related concerns. Read More »
-
TSB #09-020-18-3458
Some vehicles may exhibit BLUETOOTH? hands-free and/or text messaging related concerns. To improve the handling of BLUETOOTH? hands-free and/or text messaging customer concerns, Mazda created a special service and parts exchange program ... Read More »
-
TSB #09-009/16
HANDS-FREE BLUETOOTH MODULE AND/OR TEXT MESSAGING TROUBLESHOOTING PROCEDURE. SOME VEHICLES MAY EXHIBIT BLUETOOTH HANDS-FREE AND/OR TEXT MESSAGING RELATED CONCERNS. Read More »
-
TSB #09-013-15-3036
SOME VEHICLES MAY EXHIBIT A RATTLING NOISE FROM INSIDE THE FRONT DOOR WHEN THE DOOR VIBRATES WHILE DRIVING OR WHEN THE AUDIO SYSTEM BASS IS TURNED UP. Read More »
-
TSB #09-039-14-2923
SOME VEHICLES MAY EXHIBIT BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING RELATED CONCERNS. TO IMPROVE THE HANDLING OF BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING CUSTOMER CONCERNS, MAZDA CRE-ATED A SPECIAL SERVICE AND PARTS EXCHANGE PROGRAM ... Read More »
-
TSB #09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Read More »
-
TSB #09-023-18-3475
When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as ... Read More »
-
TSB #0900516
Siriusxm satellite radio registration transfer after unit replacement Read More »
-
TSB #09-012-14-2891
WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS ... Read More »
-
TSB #09-003-13-2776
WHEN DEALING WITH CUSTOMER COMPLAINTS OF EXCESSIVE CONDENSATION AND/OR WATER WITHIN THE HEADLAMP UNIT, FIRST DETERMINE IF ALL THE BULB SOCKETS ARE PRESENT AND CORRECTLY INSTALLED. IN MOST CASES YOU WILL FIND THAT THE BULB SEAL NO. Read More »
-
TSB #SA-014-22
Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories. Read More »
-
TSB #01-003/22
The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #MT-003-21
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Read More »
-
TSB #00-001-20-3689
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #SSPA0
Parts ordering process for SSPA0 2009-2013 Mazdas6 Sticky Dashboard - Crash pad warranty extension. Effective today, March 23rd orders for the Mazda6 crash pad, part number GSYL-60-350 can be placed using the DAG Restricted Parts Order ... Read More »
-
TSB #09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #SSPA9
Mazda Motor Corporation is extending the warranty coverage for specific repair of instrument panel on certain 2010-2013 Mazda3 vehicles produced from May 6, 2010 through July 19, 2013. Read More »
-
TSB #0000216
Mazda guidelines for factory scheduled maintenance Read More »
-
TSB #0400416
Brake noise, judder and dragging diagnosis and servicing Read More »
-
TSB #0100416
Battery Maintenance Read More »
-
TSB #0100516
Battery test procedure requirements using the GR81291 Read More »
-
TSB #05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION. Read More »
-
TSB #09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. Read More »
-
TSB #09-039-14-2923
SOME VEHICLES MAY EXHIBIT BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING RELATED CONCERNS. TO IMPROVE THE HANDLING OF BLUETOOTH? HANDS-FREE AND/OR TEXT MESSAGING CUSTOMER CONCERNS, MAZDA CRE-ATED A SPECIAL SERVICE AND PARTS EXCHANGE PROGRAM ... Read More »
-
TSB #01-021-13-2817B
SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED. Read More »
-
TSB #01-021-13-2817A
SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED. Read More »
-
TSB #01-021-13-2817
SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED. Read More »
-
TSB #09-019-13-2805
TO IMPROVE HANDLING OF CUSTOMER CONCERNS WITH HANDS-FREE (BLUETOOTH) VEHICLE SYSTEMS, MAZDA LAUNCHED A NEW SERVICE PROCEDURE AND PART EXCHANGE PROGRAM EFFECTIVE FEB. 08, 2010 ON APPLICABLE VEHICLES. Read More »
-
TSB #09-018-13-2803
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. Read More »
-
TSB #00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. Read More »
-
TSB #00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. Read More »
-
TSB #00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. Read More »
-
TSB #09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES. Read More »
-
TSB #09-039-12-2725
SOME VEHICLES MAY EXPERIENCE AN OCCASSIONAL AND UNEXPECTED ILLUMINATION OF THE CRUISE MAIN INDICATOR LIGHT (AMBER) WITH THE IGNITION KEY OPERATION CYCLE OF OFF-START-ON. Read More »
-
TSB #MC-5409D
MAZDA: PARTS ORDER RESTRICTIONS FOR RECALL 5409D (2010 MAZDA3 EMISSION HARNESS) HAVE BEEN ELIMINATED. *PE Read More »
-
TSB #SA-032-23a
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Read More »
-
TSB #09-036-20-3756
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTH??A? hands-free unit or text messaging related concerns. Read More »
-
TSB #SSP99_SSPA9
SSP99 - 2010 MAZDA3 - DASHBOARD UPPER PANEL STICKY SURFACE: For certain 2010 Mazda3 vehicles, the warranty coverage for dashboard replacement for sticky surface condition only is extended to 10 years (120 months) from the original ... Read More »
-
TSB #02-002-20-3651
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Read More »
-
TSB #07-002-19-3616a
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #01-022-19-3657
There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. Read More »
-
TSB #09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. Read More »
-
TSB #09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. Read More »
-
TSB #MTI_1031
Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device. Read More »
-
TSB #0400316
Clunk/bang/buzz noise during first forward movement after sitting Read More »
-
TSB #09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:?MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS. Read More »
-
TSB #09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER?S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. Read More »
-
TSB #SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. Read More »
-
TSB #02-002-13-2749
SOME VEHICLES WITH THE REAR SHOCK ABSORBER (PART NUMBER BBM3-28-910 WITH ANY SUFFIX) MAY EXHIBIT FLUID LEAK-AGE, AND SOMETIMES A CLUNKING NOISE. Read More »
-
TSB #07-002-19-3616a
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #07-002-19-3616
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. Read More »
-
TSB #MTI_1034
This article provides HVAC heater/defroster operating tips using Mode selector dial. This includes the use of intermediate positions. Read More »