2011 Mazda MAZDASPEED3
TSBs (Technical Service Bulletins)
Technical Service Bulletins (TSBs) for the 2011 MAZDASPEED3 are official communications between Mazda & their dealerships that describe processes for troubleshooting or fixing certain common problems. All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #04-002-14-2879
SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. Read More »
-
TSB #01-015-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #01-015-14-2929
SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0300:00 (RANDOM MISFIRE DETECTED) STORED IN MEMORY. THE VEHICLE CAN RUN NORMAL WITHOUT ANY DRIVEABILTY OR NVH CONCERN.THIS IS CAUSED BY IMPROPER PROGRAMMING OF THE PCM. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #0100216
PreMixed long life "FL22" Engine Coolant Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #09-016-23
Speedometer replacement procedure Read More »
-
TSB #01-005-21-3778
The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Read More »
-
TSB #01-006-21-3779
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #09-003-20-3671
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #0900916
HandsFree bluetooth module and/or text messaging troubleshooting procedure Read More »
-
TSB #SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is? 2017 Mazda North American Operations, U.S.A. Read More »
-
TSB #09-016-23
Speedometer replacement procedure Read More »
-
TSB #0901316
Excessive condensation or water within the headlamp assembly caustion Read More »
-
TSB #09-014-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE. Read More »
-
TSB #SA-050-17
CAUTION: At no point during the repair for Recall 9916H (LIFTGATE STAY DAMPER SAFETY RECALL) should "Vise-Grips" or other similar tools be used to hold the lift gate stay dampers. Use only the tools specified in the recall. Read More »
-
TSB #SA-050-17
CAUTION: At no point during the repair for Recall 9916H (LIFTGATE STAY DAMPER SAFETY RECALL) should "Vise-Grips" or other similar tools be used to hold the lift gate stay dampers. Use only the tools specified in the recall. Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #MT-002-20
New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010. Read More »
-
TSB #00-001-21-3768
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Read More »
-
TSB #MT-002-20
New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010. Read More »
-
TSB #09-025-21-3824
This service bulletin provides information regarding the proper use of the driver??A?A?s floor mat to avoid any potential interference with the foot pedals. Read More »
-
TSB #07-001-21-3775
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. Read More »
-
TSB #09-002-21-3770
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer Read More »
-
TSB #09-006-20-3673a
When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Read More »
-
TSB #09-003-20-3671
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. Read More »
-
TSB #00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. Read More »
-
TSB #0100216
PreMixed long life "FL22" Engine Coolant Read More »
-
TSB #09-025-14-2925A
SOME VEHICLES MAY EXHIBIT A CRACKING NOISE ORIGINATED AT THE POSITIONING PINS NEAR THE TOP CORNERS OF THE WIND-SHIELD AND/OR REAR WINDOW WHEN DRIVING ON UNEVEN ROAD SURFACE. Read More »
-
TSB #09-025-14-2925
SOME VEHICLES MAY EXHIBIT A CRACKING NOISE ORIGINATED AT THE POSITIONING PINS NEAR THE TOP CORNERS OF THE WINDSHIELD AND/OR REAR WINDOW WHEN DRIVING ON UNEVEN ROAD SURFACE. Read More »
-
TSB #02-008-13-2811
SOME VEHICLES MAY EXHIBIT A SQUEAKING OR KNOCKING NOISE FROM THE REAR OF THE VEHICLE WHEN PASSING OVER A BUMP. THIS IS CAUSED BY DUST ENTERING BETWEEN THE REAR STABILIZER BUSHING AND STABILIZER BAR, WHICH WEARS DOWN THE BUSHING. Read More »
-
TSB #01-015-14-2929
SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0300:00 (RANDOM MISFIRE DETECTED) STORED IN MEMORY. THE VEHICLE CAN RUN NORMAL WITHOUT ANY DRIVEABILTY OR NVH CONCERN.THIS IS CAUSED BY IMPROPER PROGRAMMING OF THE PCM. Read More »
-
TSB #09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES. Read More »
-
TSB #09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:?MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS. Read More »