The contact owns a 2005 Nissan Altima. The contact stated that the driver's side floor board was rusted. In addition, there was a hole in the floor board. The vehicle was taken to the dealer where it was diagnosed that the floor board needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 67,998. The VIN was not available.

- Northville, MI, USA

The contact owns a 2005 Nissan Altima. The contact noticed a piece of metal hanging underneath the passenger side of the vehicle. The dealer stated that the floor on the passenger side was totally rusted and there was a hole under the carpet. The manufacturer was notified of the failure. The vehicle was not repaired. The VIN was invalid. The approximate failure mileage was 178,000.

- Shorewood, IL, USA

Undercarriage (floor boards) on passenger & driver side rusted. Holes with flooring carpet showing through.

- Danville, PA, USA

The floor boards under the passenger's feet are completely rusted out. This is a huge safety hazard and should be treated as such. From all the reports, it doesn't seem like Nissan or NHTSA is taking this seriously. You can see the road thru the huge holes. When a vehicle that is only 10 years old and spent some of that time down South, away from any possibility of salt on the roads has rusted out floor boards, this is not 'normal' corrosion.

- Cross Plains, WI, USA

The floor boards under the passenger's feet are completely rusted out. This is a huge safety hazard and should be treated as such. From all the reports, it doesn't seem like Nissan or NHTSA is taking this seriously. You can see the road thru the huge holes. When a vehicle that is only 10 years old and spent some of that time down South, away from any possibility of salt on the roads has rusted out floor boards, this is not 'normal' corrosion.

- Cross Plains, WI, USA

Undercarriage rust I am seeing everyone with 2002-2005 Nissan Altima are having this issue. This getting out of control

- Warwick, RI, USA

Undercarriage of driver side is severely rusted. Hole in driver's seat floor.

- Danville, PA, USA

The front seat floor rusted out.

- Jefferson City, MO, USA

My 2005 Nissan Altima has holes in the front driver's side and front passenger's side floorboard due to extreme rust.

- San Diego, CA, USA

Due to a known engineering flaw, water gets caught under the floor boards and rots/rusts out the flooring. My feet are about to fall through the floor of car. Passenger side is worse. The dealer/Nissan is well aware of the issue and still will not cover it. There should be a recall on this. There is a hole in each floorboard that was put there intentionally. Since there is nothing structural to fill it water can get in when the undercoating develops cracks. Once water gets in, it just lays under the asphalt insulation and between the sheet metal and rots from inside out. I had a warranty on it and the dealers I have taken it to, many times for many jobs and maintenance, etc. Never once mentioned it. I just recently was made aware of it and Nissan will not do anything to help. They are well aware of the issue and won't do anything about it unless made to.

- Huntley, IL, USA

This is a 2005 Altima well maintained throughout all these years. I found a 10"X10" hole in passenger side floor pan. It was rusted very badly inside out. It must have been developing the rust for quite a few years. It is a safety hazard and there should be a recall as so many Nissan owners are having the same issue.

- Hanover Park, IL, USA

Well maintained, garaged-kept Altima had no visible body rust anywhere upon inspection last November. Today I noticed rusty flakes on the floor of my garage, and upon looking underneath the car, found that one half of the driver's side floor pan was caving in. This rust is not noticeable to the consumer until the rust is all the way thru to the exterior, at which point the weight of the foot breaks it thru the undercoating. The passenger side floorpan was also caving in. When I took up the rubber mats, floormats, and carpet/pad, I saw large holes on both driver and passenger sides which only affected one half of each floorpan. These rusted halves have a type of hard "black shingle" stuck to the floor, and from what I observed also have a small 3"X3" silver paper completely covering what should have been a drain hole. The unrusted halves are painted, have no "shingles" and no rust whatsoever despite being butted right up to the rusted halves. These "shingles" appear to be the problem, the rusted metal was firmly attached to them. This must be a design defect or someone at Nissan did not do thier job right (since the drain holes were covered up with silver paper). This rust obviously started invisibly from inside the car. I was able to easily push the rusted metal thru - I am glad I was able to discover this before someone could put thier foot thru the floor of a moving vehicle or fall asleep at the wheel due to fumes. This was fixed at at cost of $900 to me, because I have children and this is a hazard. We also have a 2000 Chevy, and a 2005 Dodge, and neither have such rust on/in the floorpans, despite being parked outside and driven in the same elements. I would like to be reimbursed for the Altima's floorpan repair as the amount of rusting is not normal for the care taken, and also is not noticeable nor preventable by the consumer.

- Chicago, IL, USA

I took my Altima to the Nissan dealership for regular maintenance and the mechanic noticed the common rusting problem in my front passenger side floor board. There is a hole about 3-4 inches and you can look up and see the carpet. I'm really upset and wasn't aware of this issue with Altima when I bought my car preowned six months ago. It is in otherwise excellent condition, completely pampered by the previous owner and myself, and shouldn't be rusting through at this age and with only 59K miles on it. Despite what Nissan might be claiming, having large holes in your floorboard is an absolute safety hazard and I really feel concerned for the Altima owners who didn't catch the problem as early as I have, or even have yet to discover it! some of the holes that other people have experienced can fit more than a foot through!! I am also very concerned about the fumes creeping in. Now that I am informed of the design flaw, I can 100% count on my drivers side to begin rusting out too. This is really expensive to repair and I shouldn't be repaired it as it is no fault of any of us drivers, nor the rain nor the salt. It is a safety design flaw and Nissan should recall. Thank you NHTSA for listening!

- Sinking Spring, PA, USA

Floor pan almost completely rusted out. Vehicle was inspected today and reported severe rust, to the point that feet may be able to go through the floor soon.

- Chicago, IL, USA

While I was parked at home I was examining the underside of my 2005 Altima and to my shock found a 12 inch by 10 inch section of rust with large flakes coming from the floor panel on my passenger side. There are holes in this section that are penetrating through the layers towards the inside of the car. The drivers side has the beginning of rust and cracking floor panel as well. I am cannot believe this, I am the second owner and have meticulously maintained the car just as the first owner had and there is no rust anywhere else on the body. I researched this rusted out floor paneling and found that there are news stories and that it is a nationwide problem that Nissan needs to address! I do not feel safe structurally with the rust compromising strength and safety and I do not want to have any passengers ride in that seat. Clearly there is a major issue that has been going on for some time to reach this extent! I believe this is a design flaw because of the rusting out of the floor panels from the inside out! I had the rusted out floor panels examined by a local body shop and they quoted me $2500+ that is outrageous and leaves me to deal with a problem that is not my fault, but failure of the materials.

- Tipp City, OH, USA

Noticed a large piece of something hanging from undercarriage. Took to body shop who stated both driver's and passenger's sides are severely rusted with multiple holes up to 6 inches totally through to carpet and interior. Considered a safety risk due to exposure of fumes/gases from engine/exhaust as well as the risk of "falling through". rest of car looks good no visible rust on frame or rear. No history of collisions or impact damage. We are not in an area of great road salt need nor near an ocean. Estimate to repair over $1000. Advised not safe to drive or sell as is. Noticed in complaints, this has been an issue since at least 2010. Why has a recall not been issued?

- Vine Grove, KY, USA

Part of the floor pan under the passenger side foot area fell off the car and onto my driveway. I now have a hole in my floorboard and can touch the rug.

- Sewell, NJ, USA

The driver and passenger side floor boards have rusted/ rotted out. It is only visible from underneath the car. It was discovered by my mechanic when the car was on a lift.

- Nesconset, NY, USA

On a recent scheduled maintenance visit to the Nissan dealership, I was informed that my 2005 Nissan Altima had a hole in the floor pan. My Altima is in otherwise excellent condition with less than 42,000 miles. I was told this has been an ongoing issue with this year and model Nissan, and it could cost thousands of dollars to fix it. It was also explained that Nissan has a plate that could be ordered for $700, which would correct the problem. You can buy a new Altima front floor pan from a company on the internet for $79.95. Why is Nissan gouging the consumer by charging $700. Shame on you Nissan for adding insult to injury. Nissan should be responsible for this repair. This should certainly warrant a recall by Nissan due to a manufacturing defect, thus causing a safety issue.

- Essington, PA, USA

The contact owns a 2005 Nissan Altima. The contact stated that the floor pan on the front passenger side was prematurely rusted and corroded. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and provided no remedy. The VIN was not available. The approximate failure mileage was 130,000.

- Chicago, IL, USA