IF YOU CONFIRM The MIL is on with any one of these DTCs alone, or any combination of any of DTCs: * P2765 - CLUTCH B SPEED SENSOR * P0500 - VEH SPEED SEN/CIRC * P1574 - ASCD VHL SPD SEN * P1715 - INPUT SPEED SENSOR * P0720 - VEH SPD SEN/CIR And * Moisture and/or corrosion is present on or around the Secondary Speed Sensor pins. ACTION a. Remove the moisture from the Harness connector with CRC QD (or equivalent) electric cleaner. b. Replace Secondary Speed Sensor shown in Figure 1. Please see this bulletin for further details.