Fuel Feed Tube Clip
Dealer Inventory
*****Dealer Announcement*****
Nissan is conducting a dealer inventory quality action to inspect the fuel feed tube clip and,
if necessary, secure it to the fuel line on 9,667 specific 2020 Sentra vehicles identified in
Service Comm. Due to a production issue, a small number of fuel line clips may not have
been properly set on the high-pressure fuel line and may need to be secured as a result. If
the fuel feed tube clip is missing, or damaged, the fuel line will need to be replaced.
Affected vehicles are subject to stop sale and are either currently in dealer inventory or
assigned and in transit to the dealer.
*****What Dealers Should Do*****
PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS:
1. Verify if vehicles are affected by this quality action using Service Comm or DBS
National Service History � Open Campaigns I.D. PM957
� New vehicles in dealer inventory can also be identified using DBS (Sales->
Vehicle Inventory, and filter by Open Campaign).
� Refer to NPSB 15-460 for additional information
� Please continue to check newly arriving inventory for campaign applicability.
2. Please do not drive, loan, sell or trade the specific vehicles in Dealer Inventory
subject to this Quality Action.
3. Dealers must use the attached procedure to inspect and, if necessary, secure the
fuel tube clip prior to retail delivery of the vehicle.
� If the fuel feed tube clip is damaged or missing, dealers should replace the
fuel line as per the instructions in the Electronic Service Manual (ESM).
4. The service department should submit the applicable warranty claim for the action
performed so it can be closed on Service Comm and release the vehicle.
