Rear Crank Shaft Oil Seal and Retainer Plate
For Cummins equipped vehicles only;~
If you are working on a 2015 or 2016 vehicle ONLY and are replacing the Rear Main
Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A,
05086754A, 05015705A. Remove the retainer with the seal installed. Please do
not disturb seal in retainer when removing from engine. Please refer to detailed
repair instructions in DealerConnect TechConnect for oil seal retainer replacement.~
Cummins Engineering is currently investigating the root cause of the oil leak
concern and would like to analyze these parts. Please contact Chad Eichbrecht at
cell (248) 309-2695 to arrange for part return~
If you do not receive a response within 15 minutes, please proceed with normal
repair.
~_________________________________________________________________~
Contact us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP
Tech Tip. Please include the Part Number(s) and Tech Tip Part Description of the
Tech Tip you are referencing for our tracking system.
