2006 Subaru Forester
TSBs (Technical Service Bulletins)
Technical Service Bulletins (TSBs) for the 2006 Forester are official communications between Subaru & their dealerships that describe processes for troubleshooting or fixing certain common problems. All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
-
TSB #04-13-09R
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018. Read More »
-
TSB #04-13-09R
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN ... Read More »
-
TSB #04-13-09R
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within ... Read More »
-
TSB #04-13-09R
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018. Read More »
-
TSB #WVX-34R
Subaru of America, Inc. (SOA) has determined that affected vehicles listed, may have been manufactured with front lower control arms (transverse links) that could corrode in the hanger bracket area if exposed to salt for a prolonged period. Read More »
-
TSB #06-68-19R
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. Read More »
-
TSB #02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
-
TSB #02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
-
TSB #02-162-15
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
-
TSB #037012R
Repair Procedure for High-Pitched Sound Read More »
-
TSB #09-51-08R
This bulletin is to advise of SOAa??s revised catalytic converter recycling program shipping procedure. Read More »
-
TSB #03-82-18R
This bulletin announces a design change to the clutch release bearing. Read More »
-
TSB #03-82-18R
This service information bulletin announces a design change to the clutch release bearing used on the models listed. Read More »
-
TSB #07-75-13R
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. Read More »
-
TSB #WVU31R
2.5 Liter N/A engine only. REVISED. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. Read More »
-
TSB #02-164-16
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability Read More »
-
TSB #SPB-WVU-31
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ECM REPROGRAMMING PROCEDURE. 2006-2010 LEGACY/OUTBACK/FORESTER/IMPREZA. *RM UPDATED 9/26/11. *PE Read More »
-
TSB #166806
VEHICLES EQUIPPED WITH 4 EAT DIAGNOSTIC PROCEDURES FOR P0851/P0852. *KB Read More »
-
TSB #02
RUBBING MARK ON TIMING BELT. SUBARU. *TT Read More »
-
TSB #02-104-08
INTAKE MANIFOLD MODIFICATION. *NJ Read More »
-
TSB #SB-WVL-22
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. FUEL TANK ONE WAY FUEL VALVE. CERTAIN MODELS REQUIRE PERMANENT REMOVAL OF THE ONE WAY FUEL VALVE LOCATED IN THE FUEL TANK. Read More »
-
TSB #037012R-1
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts Read More »
-
TSB #03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
-
TSB #03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
-
TSB #037012R
This Bulletin provides production change, repair procedure and parts information to address a customer concern of a high-pitched sound coming from the transmission extension housing area. Read More »
-
TSB #03-82-18R
This bulletin announces a design change to the clutch release bearing. Read More »
-
TSB #03-70-12R
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS - THIS BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A ... Read More »
-
TSB #166399R
Remanufactured Automatic Transaxle Program Read More »
-
TSB #03-68-12R
THIS BULLETIN REVIEWS A CHANGE TO THE PART NUMBERS USED FOR THE TRANSFER DRIVEN GEAR BEARINGS. THESE REVISED BEARINGS ARE TO BE USED TO ENHANCE DURABILITY. Read More »
-
TSB #036812R
5MT Transfer Driven Gear Bearings Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
-
TSB #15-302-22
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
-
TSB #15-192-22R
This bulletin has been developed to outline the steps for gathering basic essential information during diagnosis and repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment). Read More »
-
TSB #01-167-08R
This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information. Read More »
-
TSB #037012
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts Read More »
-
TSB #07-75-13R
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. Read More »
-
TSB #0116809R
Replacement Key and Immobilizer Info Read More »
-
TSB #0116809R
Replacement Key and Immobilizer info Read More »
-
TSB #WVU31R
2.5 Liter N/A engine only. REVISED. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. Read More »
-
TSB #TKA-20R/TKB-30R/
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain 2003-2014 model year Legacy and Outback vehicles, 2003-2006 model year Baja vehicles, 2009-2013 model year Forester vehicles, ... Read More »
-
TSB #12-231-18
( 2017-2018MY Impreza - 5 Dr Only) Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
-
TSB #SB-05-50-10R
SUBARU: THERE IS A STEERING WHEEL VIBRATION AT HIGHWAY SPEEDS DUE TO AN IMPORPER WHEEL BALANCE. *RM Read More »
-
TSB #07
CHANGE OF SEAT HEATER RELAY. *TT Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
-
TSB #12-249-23R
This bulletin announces the recommended cleaning procedures to followed when encountering vehicles with long time exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles. Read More »
-
TSB #18-229-22
The purpose of this bulletin is to provide a description of current changes to Service Manuals. Read More »
-
TSB #15-302-22
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
-
TSB #01-167-08R
This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models. Read More »
-
TSB #01-167-08R
This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models Read More »
-
TSB #09-51-08R
This bulletin is to advise of SOAa??s revised catalytic converter recycling program shipping procedure. Read More »
-
TSB #14-22-16R
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
-
TSB #03-82-18R
This bulletin announces a design change to the clutch release bearing. Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information. Read More »
-
TSB #14-22-16R
Special Service Tools Cross Reference List. Read More »
-
TSB #01-181-20
All Models (Vehicle Cleaning- COVID-19Best Practices) Read More »
-
TSB #07-75-13R
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. Read More »
-
TSB #Subaru Tech Tips
Subaru Service and Technical Support Line Newletter. Read More »
-
TSB #14-22-16R
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
-
TSB #03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
-
TSB #02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
-
TSB #01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
-
TSB #02-162-15R
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
-
TSB #04-13-09R
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within ... Read More »
-
TSB #03-70-12
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS Read More »
-
TSB #04-13-09R
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN ... Read More »
-
TSB #01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
-
TSB #01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
-
TSB #03-82-18R
This bulletin announces a design change to the clutch release bearing. Read More »
-
TSB #07-75-13R
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. Read More »
-
TSB #03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
-
TSB #03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
-
TSB #01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
-
TSB #915
2006 NEW MODEL UPDATE SUPPLEMENT. *TT Read More »