Unexpected acceleration after parking, jump curb into tree, causing $7,000 in damage. Air bags did not deploy, both myself and passenger hit knees on dash, even with our seat belts still on. Had other computer issues earlier that day, back up sensors didn't work while backing car right behind mine. Car has now been at Subaru for a month, waiting for engineers results after their inspection 2/14/2018

- West Dundee, IL, USA

Left rear wheel bearing failed at 40,293 miles in May 2016 left front wheel bearing failed at 76.699 miles in Feb 2018 this is a defect that should be investigated

- London, KY, USA

While driving down freeway at 75 mph, transmission made two clunking sounds, and speed decreased - rpms increased. We could smell oil burning smell, but no smoke or leaks. We were approximately 12 miles outside of las vegas and 22 miles into our trip. There was no warning and no decrease in speed or other signs prior to the clunks/clanks. Vehicle towed to Subaru of las vegas. First Subaru tried to say rear differential caused. Please see dan's driveline invoice. Next they tried to say front differential caused. I challenged - how can a functioning differential cause a transmission to become toast? next step is Subaru hq tech to tear down transmission. I've included documents from auto lab (did 30K mile service), Subaru invoice, Subaru email saying front differential caused,

- North Las Vegas, NV, USA

The transmission has been leaking since we purchased the car in Jan 2015. One dealer told us there was no leak and finally decided it was the right differential and repaired that. The transmission still leaked. Took it back to dealer where bought, they found leak and said it was repaired but it is still dripping. Plan on taking it back to them next week. We keep clean cardboard under the area where the leak is to protect the garage floor and document the leak. Last repair July 25 of 2017.

- Palm Springs, CA, USA

Intermittently the car does not respond when the accelerator is depressed. I am told by the dealership that this is a common problem with the cvt transmission. This is a major safety issue as I have almost been hit on several occasions when turning left or merging into traffic. If the accelerator is depressed more and more, the car finally lurches forward (or backward if backing up) and the brakes have to be slammed on.

- Gulf Breeze, FL, USA

Extreme engine hesitation (cvt) from idle stop making a turn, ie center turning lane. Driver cannot rely on normal opposing traffic breaks to complete a turn. You must increase that distance by at least 5 times, then you don't know if engine/transmission will kick back in! this is extremely dangerous! dealer: "that's the way its supposed to work!"?" this has happened several times!

- Billings, MT, USA

Left hand wheel bearings (hub unit) failed and was replaced under warranty at 17,000 miles. Right hand wheel bearing (hub unit) failed and was replaced under warranty at 32,000 miles.

- Boulder, CO, USA

After moving vehicle in reverse, then shifting into drive, the transmission remains in neutral until the accelerator is depressed allowing car to roll backward if on an incline. There is then a surge forward when it does engage. Also, on a cold start when temp. Is below 0 trans will stay 1-2 gears lower than it should for > 5 miles allowing for excessive engine rpms. After taking car to dealer, I was informed that both these conditions were normal for this transmission.

- Brighton, MI, USA

I have a surging issue with my 3.6R after cold starts. Upon start-up, the idle will be ~1800 and when I put the car in drive, it will drop to 800-1000rpm. Then, as I slowly pull into the garage, or pull into a stopped line of traffic, the engine will surge back to the higher RPM, causing the vehicle to push through the brakes. I have had this return to high idle occur after I have come to a complete stop, causing the vehicle to push through the applied brakes and requiring additional brake pressure to stop the vehicle. I have also had it occur when slowly rolling forward. I believe this is an unsafe situation that could result in damaged property and/or injury. I see that there is at least one additional NHTSA complaint for this issue, which Subaru deemed "normal" operation. I did contact my dealer requesting a firmware update, if one was available, and they said there was not one. I have owned this vehicle since 3/23/2015 and this issue has occurred since new, but it more common in colder weather. I have 18K miles on the vehicle.

- Georgetown, KY, USA

I received a safety recall from the NHTSA (campaign id number 15V502 - transmission oil leak). I contacted the Subaru dealer and they tell me there is no such recall. Who is right?

- Lawrence,, PA, USA

I had stopped to disembark myself and passengers. I turned off the engine. I did not realize it was not in park. As the passenger on the left was getting out, the car started to roll backwards. I was able to put on the brake to stop it and put it in park. I have a push button ignition. On page 3-6 of the owner's manuel it says " the push button switch cannot be switched to "off" when the select lever is in a position other than P". in contacting the dealer ship they checked other Outbacks with push button starters and they also have this problem.

- Fernandina Beach, FL, USA

I was getting gas at a station. When I was finished pumping gas I entered the car, started it, put it in reverse, braked, put it in drive, it rolled backwards, put on the brake, it continued to roll backwards, gave it some gas since it was still in drive, car jumped forward almost hitting car parked in front of me, my foot was still on brake and in drive while I tried to keep it from rolling backwards. Tried to manipulate brake and gas to stop rolling backwards. Eventually I swerved around parked car in front of me without hitting it. This has happened 4 times since I purchased new car. I went to 2 Subaru dealerships and they said that is normal.

- Camarillo, CA, USA

When the engine is cold, the idle speed is 1600 RPM when started. When placed in reverse or drive it reduces to a nominal 900-1000 RPM. When the vehicle starts to move it suddenly drops to 600 RPM. When braking to a stop after moving vehicle the RPM suddenly jumps to 900-1000 RPM just before vehicle halts. This causes sudden unexpected acceleration of the vehicle and presents a safety hazard. I believe this is due to an engine/transmission software issue. This has occurred since new. Updated 9/15/15 updated 11/07/2017

- San Jose, CA, USA

.of us as traffic was causing it to speed up and slow down. With no warning, our car suddenly lurched ahead as if I had stepped hard on the gas pedal, throwing us back in our seats. After a few seconds, it hit brakes and threw us forward. It did not completely stop but resumed previous speed. This continued to happen every couple of minutes. I took the first exit that appeared, about two miles ahead. I was very frightened that we might collide with the van in front or swerve into the traffic in the lane next to us, or that it might suddenly stall in our lane. I did not try to stop the car although I had my foot resting on the brake pedal. It badly frightened my wife and I. the car has a cvt transmission. We stopped in a parking lot and then had car towed to closest of two Subaru dealers in the area. I had both of them run extensive checks on engine, power train, computer, etc. Neither could identify any issues that would cause the problem. My wife has sworn she will never drive or ride in the car again. I can't blame her. We have to go over a winding, hilly road of about ten miles to go home. There is heavy car and truck traffic off and on throughout the day. To get home, we rented a car as I now fear driving this road in this car at anytime day or night. The dealer where we bought the car has offered to store the car for us until we decide what to do. I've tried calling Subaru and will try again. Long wait periods so far. This is our second Subaru. First was a 2012 Outback which we traded for the current one which we have leased. The irony of this is that we bought the current one for its many safety features! I've owned many cars in my life but have never experienced anything like this!

- Half Moon Bay, CA, USA

The contact owns a 2015 Subaru Outback. The contact stated that while at a complete stop, the vehicle failed to accelerate without warning. The vehicle was taken to a dealer where the technician informed that the vehicle was functioning as designed. The manufacturer was not notified of the failure. The failure mileage was 856. Updated 02/18/15 updated 9/12/2017

- Bonita Springs, FL, USA