TSB: REVISION NOTICE February 16, 2018 Rev2: ? Applicability has been updated to include 2018 model year Mirai and Camry HV vehicles. ? The Introduction and Initialization/Update Procedure sections have been updated. ? Instructions for adding a Safety Connect static cling to applicable vehicles have been added. July 20, 2017 Rev1: ? Applicability has been updated to exclude 2018 model year Avalon vehicles. ? The Initialization/Update Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. An initialization procedure is required to activate the Entune? App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus, and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the initialization procedure, individual Entune? apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
