Problems with transmission, torque, power steering, and front end stable rods & arms. The transmission and torque had been replaced twice, the power steering once, the font end stable rods and arms twice and remained bad. The battery light had come on and the idler pulley was replaced, there was a creaking/cracking noise when turning the wheel and the outer tie rods were replaced along with the toe being reset, there was a clunk when going over the bumps, there was a vibration underneath due to the transmission, the engine light would come on and off and seemed like the shifts were erratic, the transmission leaked badly, and on some occasions the starter did not engage.

- Freeland, MD, USA