10.0

really awful
Crashes / Fires:
0 / 0
Injuries / Deaths:
0 / 0
Average Mileage:
0 miles

About These NHTSA Complaints:

The NHTSA is the US gov't agency tasked with vehicle safety. Complaints can be spread across multiple & redundant categories, & are not organized by problem. See the Back button — blue bar at the very top of the page — to explore more.

Get notified about new defects, investigations, recalls & lawsuits for the 2021 Chevrolet Trax:

Unsubscribe any time. We don't sell/share your email.

Get free help with your lemon!
close ad
problem #4

Aug 062021

Trax

  • miles
1,992 miles. Two times when applying brakes hard the vehicle pulled hard to the right. Both times I narrowly avoided hitting the vehicle in front of me. I went to the service department they did a test drive and were unable to duplicate the issue. They checked the brake pads and rotors and stated all look normal. In addition they did a multi-point inspection. 6,253 miles. Again applying brakes hard the vehicle pulled hard right. Days later the brakes were spongy and then that lead up to the brakes going to the floor board. I went to the service department where they did a test drive and found that they were going to the floor board. They ran a diagnostic check and found the master cylinder were causing concern. They installed sl-n-cylinder kit (04649-95414) and n-fluid (08800-bopckt) They replaced brake master cylinder and reset the operation. Lop=2440100 L=1.10 L=0.50 to bleed system. They did a multi-point inspection. They indicated caused by scheduled maintenance. With all incidents no warning lights were showing.

- Cumby, TX, USA

problem #3

Apr 302021

Trax

  • miles
1,992 miles. Two times when applying brakes hard the vehicle pulled hard to the right. Both times I narrowly avoided hitting the vehicle in front of me. I went to the service department they did a test drive and were unable to duplicate the issue. They checked the brake pads and rotors and stated all look normal. In addition they did a multi-point inspection. 6,253 miles. Again applying brakes hard the vehicle pulled hard right. Days later the brakes were spongy and then that lead up to the brakes going to the floor board. I went to the service department where they did a test drive and found that they were going to the floor board. They ran a diagnostic check and found the master cylinder were causing concern. They installed sl-n-cylinder kit (04649-95414) and n-fluid (08800-bopckt) They replaced brake master cylinder and reset the operation. Lop=2440100 L=1.10 L=0.50 to bleed system. They did a multi-point inspection. They indicated caused by scheduled maintenance. With all incidents no warning lights were showing.

- Cumby, TX, USA

problem #2

Aug 062021

Trax

  • miles
1,992 miles. Two times when applying brakes hard the vehicle pulled hard to the right. Both times I narrowly avoided hitting the vehicle in front of me. I went to the service department they did a test drive and were unable to duplicate the issue. They checked the brake pads and rotors and stated all look normal. In addition they did a multi-point inspection. 6,253 miles. Again applying brakes hard the vehicle pulled hard right. Days later the brakes were spongy and then that lead up to the brakes going to the floor board. I went to the service department where they did a test drive and found that they were going to the floor board. They ran a diagnostic check and found the master cylinder were causing concern. They installed sl-n-cylinder kit (04649-95414) and n-fluid (08800-bopckt) They replaced brake master cylinder and reset the operation. Lop=2440100 L=1.10 L=0.50 to bleed system. They did a multi-point inspection. They indicated caused by scheduled maintenance. With all incidents no warning lights were showing.

- Cumby, TX, USA

problem #1

Apr 302021

Trax

  • miles
1,992 miles. Two times when applying brakes hard the vehicle pulled hard to the right. Both times I narrowly avoided hitting the vehicle in front of me. I went to the service department they did a test drive and were unable to duplicate the issue. They checked the brake pads and rotors and stated all look normal. In addition they did a multi-point inspection. 6,253 miles. Again applying brakes hard the vehicle pulled hard right. Days later the brakes were spongy and then that lead up to the brakes going to the floor board. I went to the service department where they did a test drive and found that they were going to the floor board. They ran a diagnostic check and found the master cylinder were causing concern. They installed sl-n-cylinder kit (04649-95414) and n-fluid (08800-bopckt) They replaced brake master cylinder and reset the operation. Lop=2440100 L=1.10 L=0.50 to bleed system. They did a multi-point inspection. They indicated caused by scheduled maintenance. With all incidents no warning lights were showing.

- Cumby, TX, USA