2000 Dodge Ram 2500, dash board cracking and breaking leaving sharp exposed pieces of plastic. Called Dodge but have gotten no help thus far with the problem. I feel that this could cause serious injury if and accident occurred. It cracked when we opened the door on a hot sunny day and then it has cracked and broken more in the extreme cold weather when opening the door.

- Roanoke, VA, USA

The dash board on my 2000 Dodge Ram 2400 has cracked in numerous places and is caving in. I am concerned that if the air bags deployed, passengers could injured by the sharp pieces of plastic.

- Palm Harbor, FL, USA

I ordered a new replacement master brake cylinder for my 2000 Dodge Ram 2500 pick-up truck. It was ordered through national automotive lines in shellbyville il. The master cylinder they sent was from coni-seal of lakewood, NJ 08701. When I went to bench bleed the master cylinder prior to installing it on my vehicle, the front brake fluid reservoir fluid turned red while bleeding it. I also got red stringgy debris about an 1/2 to 3/4 inch long from the inside of the master cylinder. The part # is MC250130. Do not use this part!!!!!! as you know any foreign matter in the brake line could cause a brake to stick, not apply, or it could get into the anti-lock brake system and cause it to fail or malfunction. Both parts displayed the same problem, so it appears the factory is doing something wrong, or someone is deliberately putting something in the master cylinder. If you do not bench bleed and do it on the car, you will not catch this and will put foreign matter into your brake system. This could have fatal results. I urge the D.O.T. and ntsb to investigate immediately before a fatal accident happens.

- Alsip, IL, USA

The contact owns a 2000 Dodge Ram 2500. The contact ordered a coni-seal master cylinder, part number MC250130 (na) from national automotive. He bench bled the component and noticed that it was contaminated and caused the brake fluid to have a reddish discoloration. There were also huge particles in the fluid accompanied by large lumps of debris in the master cylinder. The debris could cause substantial damage to the brake system. The manufacturer sent a new identical component, which also failed. The serial number, part number, and location of the component were unavailable. The failure and current mileages were 147,000. Updated 5/19/08 the consumer stated the parts were defective right out of the box. Updated

- Alsip, IL, USA

Dash board has cracked in several places, some pieces 3'X4' just fell into the dash.

- Cordova, TN, USA

While wheel alignment was done mechanic noticed front rotors were worn down to nothing, metal to metal. Replaced rotors and front disc pads. At this time, rotors need to be replaced again. Ball joints and tires were replaced, consumer states problems with the rear but did not specify, also did not specify types of tires. Vehicle experiencing problems with the transmission. Intake gasket replaced. New carpet in the cab was installed. New bumper and grill was installed. Consumer also states problem with the ABS along with the rotors and disc pads.

- Ladonia, MO, USA