10.0
really awful- Crashes / Fires:
- 7 / 1
- Injuries / Deaths:
- 4 / 0
- Average Mileage:
- 15,782 miles
About These NHTSA Complaints:
The NHTSA is the US gov't agency tasked with vehicle safety. Complaints can be spread across multiple & redundant categories, & are not organized by problem. See the Back button — blue bar at the very top of the page — to explore more.
Engine has cylinders flooding with coolant due to the design of the EcoBoost engine
- Ann Arbor, MI, USA
I am a single mother raising my 6-year-old daughter on my own. This past year has been extremely difficult, as my car has been constantly in and out of repair shops. I have spent more than $8,000 in the last year and a half on unexpected repairs, many of them involving serious safety issues. I was never informed about the recall and never received any notice. This situation has caused me a lot of stress and hardship, and I am asking for guidance and support to help me through it. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Roseville, CA, USA
NHTSA COMPLAINT - 2017 Ford Fusion Energi Titanium (VIN: REDACTED) - [XXX] (Collision) Q1: FAILED COMPONENT Battery Energy Control Module (BECM) and hybrid battery cell balancing circuits failed post-collision. Per Ford Recall 23V-440, Current Interrupt Device causes excess voltage, fire risk, toxic gas exposure. DTCs: U1027 (ABS/ECM loss), P2450/P2451 (EVAP stuck open/closed), P0DD2/P0DD6/P0DDE (battery cell balancing circuits H/J/K/M stuck off). Vehicle available for inspection. Q2: SAFETY RISKS Sudden power loss, fire risk, CO/HF toxic gas exposure from damaged cells. HF IDLH 0.025 g/m?. Symptoms: headaches, cognitive issues, respiratory problems requiring Brain MRI. Ford documented 7 fires, 2 while driving. Gas events recur when changing charging amperage; CO detector alarmed repeatedly; hospitalized for symptoms. Q3: DEALER CONFIRMATION NOT investigated. No Ford dealer conducted required post-collision battery diagnostics despite DTCs proving multiple system failures. United Insurance Claims ignored [legal demand] for hybrid-specific inspections. No CO/HF assessment. Battery cell balancing failures indicate physical collision damage to high-voltage system. Q4: INSPECTIONS Insurance: Standard only, ignored DTCs requiring hybrid testing. Ford Service (Tempe, AZ) and Ford Collision Center (Mesa, AZ): No inspection; reasons given a) lack capability b) we just scan the vehicle; we don't thoroughly inspect for gas leaks". Recall 23V-440 documents identical failures. Police: No report (real-time audio capture of admission of at-fault driver), no hazmat assessment. Multiple permanent DTCs prove need for Ford-certified diagnostics. Q5: WARNING SYMPTOMS Pre-collision: Intermittent issues, check engine light, reduced range. Post-collision: Reduced range, Gas exposure symptoms plus DTCs U1027, P2450/P2451, P0DD2/P0DD6/P0DDE showing communication/battery cell failures. Medical documentation available. Pattern confirms BECM/battery damage per documented defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORM
- Chandler, AZ, USA
I recently bought a gear shift bushing cap for the cable since the cable is loose. I bought the part at Tasca Ford in Cranston, RI. The part was hard to find. It-??s the same issue as the recall for the same car b ur years prior. Cap disintegrated since its plastic and next to the engine. The most recent part I bought that was used as genuine replacement has also disintegrated. I can see the pieces of it corroded. I need to buy another one but it-??s going to happen again since it-??s a faulty design. The first time it happened months ago caused my car to go into park. I couldn-??t move it out of the way in the street. It would let me put it in neutral. The second time it happened today the car got stuck in neutral and it took many tries to get it into park. Everything is in tact except the plastic bushing cap and part that clips the cable to the vehicle is corroded. Simple fix but unsafe and happens randomly.
- Woonsocket, RI, USA
What malfunctioned- Car did not give any notice that it was in engine failure for months other than under performing and upon taking it to the ford dealership was never helped with the problem they took money for an oil change and works package but failed to make sure my car was safe. My car was a safety hazard bc it gave zero warning that it was loosing power and when the engine did fail I knew something had been wrong for almost a year and felt it went ignored by Ford and was taken advantage of. The product has been confirmed by multiple mechanics that what causes it is the hose cracks and thus the engine coolant wrecks a working engine. Ford knows it-??s a problem but isn-??t acknowledging it and makes more money off of parts.
- Drexel Hill, PA, USA
The overheat light came on and antifreeze was leaking into the number 4 cylinder of the spark plug, sometimes it would lose a little power
- East Haven, CT, USA
No accident just looking to fix the recall
- Houston, TX, USA
My Ford Fusion eco boost 2017 had a faulty shifter cable bushing. When the vehicle turned off, parked (not on a hill thankfully due to safety and rolling backwards) thinking it was in park, it would not start and not go into gear and the vehicle would not shift into gears and the wrench light came on shift malfunction light came open. This was inspected, verified, and repaired at the Brandon Ford dealer when we had to get the car towed to them. All service for this car has been by Brandon Ford. They installed new bushings and cap, adjusted cable and cleaned codes, and retested as ok after repair. When researched we noted a recall on Ford Fusions with this same problem for safety issues putting owners at risk due to confusion of car in what gear it was actually in despite thinking it was in park, may have been in reverse if car was on but if car off would not start. The recall campaign number for the Ford Fusion (2013-29`17) shifter cable bushing issue is 22S43/22V413. This recall was issued on June 2022 addressing the safety of preventing the transmission from shifting properly and causing a vehicle to roll unexpectedly when parked. I had the car repaired on 04/29/25 and paid in full on my Discover card $890.72. I submitted documentation to Ford but they denied reimbursement for my claim. Would you be so kind to advise me how to register my VIN for this recall and get Ford reimbursement? Thank you kindly, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Naples, FL, USA
When parking i attempted to put the vehicle in reverse and a warning light came on "shift system failure", and the shifter cable locked in placed flashing causing the car to lock without the ability to move. Shift cable bushing is split causing dislodge from the fitting
- Richmond , VA, USA
I reported this issue back on July 1, 2022. My car was getting stuck in park and when I would get it into gear (reverse), once I put it in drive it automatically switched back to park. The gear shift bushing had broken on my car and I had to have it repaired. As of today, the bushing continues to get stuck in park and I have to turn my car off and back on, press the brake multiple times in order to get it in gear, rather reverse or drive. It continuously gets stuck. I know there was a recall on the gear shifts from 2012-2016 Fusion models. Something needs to be done about this for the 2017 model. I am afraid that once again I will be stranded with my child because my car wont go into gear and will remain in park.
- Temple, TX, USA
On 3/8 the car stopped moving while driving. No warning lights came on, no check engine lights, no fluid leaks etc. Ford spent 3 weeks investigating and said there was metal flakes in the transmission fluid. Towed it to a transmission shop whom immediately reported -??large chunks of metal-?? in the transmission fluid. Advising the transmission was degrading from the inside. Agin no warning lights or check engine light are illuminated on the dash. Entire transmission will need to be replaced at 97,000 miles!
- Fort Worth, TX, USA
Car will not shift out of Park and getting an error message of "P0929.00-A Gear Shift Lock Solenoid/Actuator Circuit A Range/Performance". There appears to be an issue with the gear shift module, and many others are experiencing the same issue. This issue could cause the driver to be stranded wherever the car decides to lock up. Anytime the driver puts the car in Park, it may not shift out of it again. Issue was experienced and confirmed at a local repair shop.
- Fishers, IN, USA
I have brought our Truck and our Car to the dealer several times and had other service that I paid for completed and they refuse to perform Recall 20C19 I have attempted to contact Ford and they have refused to respond to my concern. Bell Rd Ford is the dealer I brought it to.
- Phoenix, AZ, USA
EVAP system leak causes car to not start after putting gas in the car. Engine light stays on causing the key fob not to auto start the car. Loud Knocking noise coming from the gas tank.
- Hamilton , OH, USA
The engine on this vehicle needs to be replaced due to coolant intrusion into the cylinders. On my engine diagnosis I get Error Code #P0302 which indicates Cylinder 2 misfire detected. My vehicle overheats quickly, runs rough and the coolant reservoir is dry. The vehicle's exhaust blows out a lot of white-ish smoke with a sickening odor. I took my vehicle to my local Auto Nation Ford of Bellevue, WA service department. They told me it is what they have seen on a lot of Ford Eco-Boost engines and there was a recall on these for engine replacement but my 2017 vehicle falls out of the recall. They told me I need a new engine replaced in this vehicle to the cost of about $10,000. Auto Nation Ford Bellevue, WA's service department referenced service bulletin #22-2229 (Some 2015-2018 Edge and 2017-2019 Fusion/MKZ/Escape/MKC vehicles equipped with a 2.0L EcoBoost engine may exhibit a low coolant level, white exhaust smoke and/or a runs rough condition with or without an illuminated malfunction indicator lamp (MIL). Diagnostic trouble codes (DTCs) may include P0300, P0301-P0304, P0316, P0217, P1285 and/or P1299 stored in powertrain control module (PCM). This may be due to coolant intrusion into the cylinder. To correct the condition, follow the Service Procedure to replace the long block engine assembly.). There were no warnings or dashboard lights except when my coolant gauge rose suddenly while driving on the road. I have dutifully maintained my vehicle with regular checkups so I don't believe I am at fault for this problem. I believe the Ford Motor Company should have informed me of this chronic problem but they didn't. I also believe my 2017 Fusion should be repaired with the cost going to the Ford Motor Company for a known defect. What do I do now please?
- Kenmore, WA, USA
I had the car about 3 months when the first service light appeared. Misfire - replaced the cylinder. But 2 months later service light came on again for same issue. Ford Dealership said it was coolant intrusion. Car repeatedly overheats. Service engine light comes on/stays on. Temperature gauge will indicate high temp, then will drop to normal seconds later, then shoot to the top again. At times engine will decrease power, and I have to pull over and park until engine cools, no matter where it happens. I don't feel safe driving on the highway, or any distance more than 20 miles or so. I am also afraid to park in the garage at night in case it's too hot. Ford dealership says it needs a new engine. Called Ford Customer Service but my VIN was not on the service action 19B37 or 21N12 (even though it was manufactured at a listed plant on the listed dates) so they would not assist in covering it.
- Fort Wayne, IN, USA
The shifter cable bushing that other cars in my year got recalled for is going out. It-??s having the same problem that the recalled cars are having but my vin doesn-??t fall under it for some reason.
- Lansing, MI, USA
My vehicle Check Engine light came on and after taking it to the Ford dealership they said that there is a coolant intrusion and the short block needs to be replaced as well as the cylinder head gasket. The repairs they told me would be over $10,000. I am not able to make that payment happen and the car is now sitting in the yard. I am the only owner. I never received anything about something being wrong with these parts and then they tell me about it being messed up. I did some research and they did issue a recall on these same exact issues, but my Vin was not apart of it so my car will not be getting fixed. I would like to see why my car was not included in it and how I can get it fixed.
- Laurel, DE, USA
Shift system failure. 2023 replace plastic piece that was not a recall on 27 but was a recall on all other models. Last week shift system failure $706 to replace shifter picked up car Saturday. Today car is being towed back for shift system failure again. Car will not go out of park. I have all receipts and invoices from.
- Garwood, NJ, USA
- Wellsville, NY, USA