The brakes on my car would not release. After trying to repair we determined it was due to the abs module. Since the module has to be programed by a dealer to communicate with the ecm, I stopped and turned the car over to a Ford dealer. My car was built just outside a documented recall on the abs module. I told ford thir but they did not cover the repair. It is obvious another bad part got thru and my vehicle should be included. I wrote to the ntsb before, but never heard back. When ford replaced the abs module, I keep the bad part incase someone need to inspect the failed part.

- Peoria , IL, USA

The brake pads do not release immediately after any braking event. Brake release happens between 10 seconds and 24 hours later. Repair work indicates problem is in the abs valve module due to contamination.

- Peoria, IL, USA

HCU (hydraulic control unit) failure, causing brakes to apply without depression of the brake pedal. This occurred both at residential speeds and highway speeds. This caused brakes to over heat excessively and to dangerous levels without system warning. Failure diagnosed by ford dealership technician. Units were recalled on the 2016 Ford Transit Connects for failure unspecified and unknown if there is a relation to this issue as units were only 1 production year apart.

- Olmsted Twp, OH, USA