The Column Shifter that is installed on all 2024 GMC Sierra 2500HDs and 3500HDs poses a potential safety risk to its passengers and other drivers on the road. When the column shifter of the vehicle is in the standard drive position the shifter covers part of the screen and the direct path to the radio volume control dial and infotainment home button. It has been found and replicated that attempting to interact with the infotainment screen UI and the home button/volume control dial the driver may easily accidentally bump the shifter into the neutral position. Bumping this 8000lbs+ vehicle into neutral unintentionally can be extremely dangerous to its passengers and fellow motorists especially when hauling a heavy trailer or load like heavy-duty pickup trucks are designed to do. Bumping the truck into neutral can allow the truck to lose its acceleration capabilities and degrade braking capabilities as the engine would be disconnected from the drive wheels, limiting engine braking and exhaust braking. This kind of braking is commonly used to help stop the truck with heavy trailers and loads. This problem has been commonly referred to in multiple Facebook groups relating to the 2024 GMC Heavy Duty Truck. I personally have not had it inspected by any third party as there is not much they can do to remedy the issue. I personally recommend that General Motors redesign the column shifter in these trucks shortening it to come no further than the diameter of the steering wheel eliminating any interference with the infotainment system and the home button/volume dial. GM shall replace this updated shifter free of charge in all trucks just recently built. For GM's sake, it is important that this issue is remedied ASAP as the truck just began production and there is a limited amount on the road. This is available for inspection upon request.

- Sewell, NJ, USA