My three small children and myself were traveling on the interstate in our home town right at city speed limit of 75mph when out of nowhere from the middle lane attempted to get in the right lane to to get off on my exit 4 miles ahead I slowly hit my brakes then the gas and my car would not move I was almost plowed into numerous times and almost caused a few collisions myself since I was not able to move at all L was so scared I was about to die with my kids I was frozen

- Theodore, AL, USA

Driver's seat of my '99 Honda Accord has become loose, rocks and pulls away from steering wheel upon acceleration, causing lack of control since momentum pulls driver away from wheel. When seat is not occupied, this is evident by pushing on headrest, causing seat to 'rock' backwards approx 6". mechanic said that a piece of steel on the bracket under the seat is broken (& seat bracket is the same for all 1998-2002 models). Dealer said this isn't a recall or anything so repairs would be at my expense. Car cannot pass state inspection until this is fixed, so looks like I now have no choice but to try & locate a replacement bracket at a junkyard & pay someone to install, costing me at least $300 (with no guarantee that the replacement bracket will not have the same problem). Big safety issue here with lots of complaints reporting the same problem (per online search)- why has this not been properly addressed?

- Leesburg, VA, USA

My power assisted driver's seat bracket that attaches the seat bottom to the seat base has fractured because of the weld condition of bracket. My seat weld at the left front corner of the seat bottom now causes the seat to rock with no stability. The Honda dealership will not honor the PE02072 stating that my VIN no. Is not in the range and that the time period has expired. This is a dangerous weld failure that ODI should hold Honda accountable.

- Pace, FL, USA

1999 Honda Accord: The bracket that attaches the driver seat bottom to the seat base at the front left corner is fractured due to the weld condition of bracket, this causes the seat to wobble and I grip the steering wheel as a support when seat position shifts.

- Chesapeake, VA, USA

1999 Honda Accord: The bracket that attaches the driver seat bottom to the seat base at the front left corner is fractured due to the weld condition of bracket, this causes the seat to wobble and I grip the steering wheel as a support when seat position shifts.

- Chesapeake, VA, USA

The seat bracket on my 1999 Honda Accord broke as described in NHTSA action number PE02072. Honda refused to repair the seat and denied that there was ever a manufacture defect.

- Carlisle, MA, USA

1) I tried to sit in my front seat 2) the front seat (driver) came off its track. This is an electric seat. 3) I am running down a replacement now.

- San Lorenzo, CA, USA

The contact owns a 1999 Honda Accord. The contact stated that the driver seat in his vehicle became separated from the frame. The failure occurred while the contact was driving approximately 20 mph. He took the vehicle to the dealer and they stated that the seat detached from the bracket. He was informed that his VIN was not included in a similar product update. The current and failure mileages were 112,472. Updated 10/07/08. The transmission wasn't shifting properly. Updated 10/08/08.

- Mundelein, IL, USA

1999 Honda Accord driver"S seat has developed excessive looseness (rocking motion). Honda of America issued a product update in 2003, but is unwilling to repair problems that arose after 2005.

- Southbury, CT, USA

The contact owns a 1999 Honda Accord. While entering the vehicle, the driver's side power assisted seat tilted backwards. The contact called the dealer and manufacturer in reference to action number PE02072. A representative stated that they would reserve their right to provide a free remedy until after the vehicle was inspected by a technician. The contact is in the process of having the vehicle repaired. The failure and current mileages were 130,000. Updated 06/25/08 the dealer stated the slider assembly needed to be repalced as the broken bracket was integral with it and could not be repaired. The consumer stated when he stepped on the accelerator, the seat lurched backwards. Updated 06/25/08

- Bellvale, NY, USA

: the contact stated a piece of metal detached from the slider of the driver seat, causing free movement of the seat. The manufacturer was notified, who instructed the contact to take the vehicle to a service dealer. The vehicle was not taken in for service.

- Weston, FL, USA

: the contact stated where the seat attaches to the frame, the seat was only held on by a spot-weld. Under normal wear and tear, the spot weld breaks lose causing the seat to rock back and forth. The driver's side power seat rocks back and forth about 6-8 inches. The dealership has been made aware of the problem.

- San Antonio, TX, USA

While driving at any speed, the driver's seat moved. The vehicle has been taken to the dealer twice, but the problem continued. A part was added to remedy the problem but did not resolve the problem. The part was added twice and worked neither time. At times when the consumer was coming to a stop, the seat would jerk forward and back.

- Opelousas, LA, USA

Seat frame bracket failure on power assisted driver's seat. The left front corner of of the seat bottom bracket failed, and appear to be due to the weld condition of the bracket. Under acceleration the silt tilts backwards. Can't believe the NHTSA just closed an investigation on 3/2003 this issue and decided it did not warrant the use of Agency resources, I weigh 190 pounds, and do not jump into and out of my seat, it is clearly a manufacturing safety defect.

- Methuen, MA, USA

The left front corner of the seat has about a half-inch of vertical slack in it. (you can move the left-front corner up that much with your hand.) this allows the seat to rock back (in a rocking motion) when pushing against the seat back. This happens when getting in the car, changing positions in the seat, and even under hard acceleration. The dealer replaced the seat track under warranty. That didn't solve it. The service representative at the dealer told me this was not an uncommon problem. It started as soon as we got the car (purchased new) and it's never stopped.

- Knoxville, TN, USA

While driving the driver seat loosen up, became very mobile. Consumer feels that this can cause serious injuries if vehicle is in an accident.

- Tacoma, WA, USA

The driver seat got loose suddenly and tilted backward while the consumer was driving. The dealer replaced the lower track bracket.

- Yorktown, IN, USA

Passenger seat tracks wouldn't latch correctly allowing the entire seat to slide backward when accelerating from a complete stop smashing the rear passengers legs. Component was replaced under warranty after second time to dealer about the problem.

- Johnson City, TN, USA

Seat track is broken and seat is flopping around. The metal piece that attached to the seat frame has broken off. When looking at the break, observed metal shavings on floor and a lot of metal shavings at the point of the break. Appears to be a defective part or workmanship. My concern is that if I had had an accident, the seat would not have held and I could have been thrown out the back of the car. I have reported this to Honda customer care department, they did not seem concerned at all. Offered to pay half of the part required to fix this but they said the part was around $700! I have not had it fixed yet because I feel they should be responsible. I see that mine is the 4th complaint reported to you regarding this same issue.

- Roseville, CA, USA

Seat track broken and seat came loose.

- Simpsonville, SC, USA