When turning on the A/C around 65-67-68 degrees, a clicking sound starts. This noise is caused by the A/C Servo.
A quick workaround to remove the issue is to turn the temperature way high to start the "Heater" then go back to your desired cold temperature.
This Clicking sound occurs when the servo got stuck after turning on the A/C either by dirt or lack of lubrication.
The servo is located behind the glovebox, as it can be sen in the picture attached. My recommendation is to replace this part after it starts with the clicking sound, or you can lube it with some WD-40 or clean it with alcohol.
I replaced mine, it cost me around USD$100 and 50 for labor.
click to see larger images
When turning on the A/C around 65-67-68 degrees, a clicking sound starts. This noise is caused by the A/C Servo.
A quick workaround to remove the issue is to turn the temperature way high to start the "Heater" then go back to your desired cold temperature.
This Clicking sound occurs when the servo got stuck after turning on the A/C either by dirt or lack of lubrication.
The servo is located behind the glovebox, as it can be sen in the picture attached. My recommendation is to replace this part after it starts with the clicking sound, or you can lube it with some WD-40 or clean it with alcohol.
I replaced mine, it cost me around USD$100 and 50 for labor.
Hope it helps.
- fluxy, Doral, FL, US