While im driving the steering is shifting to the right and seems lower on right side. My tires daily need to have air in them because of the uneven weight. While I drive and let go of the gas the car pulls back like an E brake could be stuck not sure though. No accidents at all but it seems like the vehicle is getting weaker and weaker with the uneven weight going down on the tires and steering seems like it's going to crash onto the right without being able to control it.

- Crystal, MN, USA

The contact owns a 2010 Mazda Mazda6. The contact stated that the steering wheel was pulling without warning. There was rust on the frame. The vehicle was taken to an independent mechanic and the contact was informed that the vehicle was not safe to drive. The local dealer was contacted. The vehicle was diagnosed and repaired. Mechanic noted that Mazda-??s recall repair only served to keep the car from splitting apart, but it in no way resolved the control arm issue. As a result my car was unexpectedly swerving all over the road and was difficult to control. It was with the control arm still somewhat attached, though extremely loose. The contact stated that the vehicle was previously repaired under NHTSA Campaign number 18V631000 (Suspension, structure). The manufacturer was not contacted. The failure mileage was 151,000. Consumer stated there is significant rust on on side, where control arm attaches to steering. Vehicle has been repaired.

- Ann Harbor, MI, USA

The wheels were turning in and the steering was really hard to keep straight had to turn the steering wheel almost half around car make Loud screaming noises.tires went flat..i have 6 grandkids lucky I wasn't going fast the car could of flipped.subframe broke in half on passenger side rusted right out.i got this car from right way dealership in Saginaw Michigan in march of 2019 they never told me or never contacted me that there was a recall for the subframe breaking.could of killed someone!!!!

- Bay City, MI, USA

While making a right turn, I hit the brakes to avoid colliding with someone who pulled in front of me and the passenger's side front wheel locked into a position turned to the right. I had it towed to a repair shop, where I was informed that the control arm had separated from the frame due to rust. It seems there was a recall for this issue in 2018 for certain states, and while I do not currently reside in one of the affected states, I used to and my car did for most of its life.

- Mount Pleasant, SC, USA

When maneuvering to or from parking when the steering wheel is turned and puts any pressure on the steering components the right front of the car makes a very loud clunking and popping and makes both steering and moving difficult. It has gotten progressively worse over the last 2 months so I did some research and found out about the possible corrosion issue of the front right subframe and recall "inspection". I will call my local dealer and schedule an appointment as it seems this car is under an open recall and was never looked at. I just bought it as a used car in mid October and mostly drive my truck all winter so it took awhile for this to surface.

- Meadville, PA, USA

I have the open and dangerous recall ( # 2818I ) still pending at this time. It was hard enough just to get the dealership, in order to inspect the car for corrosion in the concerning areas. I don't feel that the car is safe to drive at this time and prefer that no one rides with me when driving it, just for the safety of others. I'm very concerned that this fix will not come soon enough and the problem keep messing up my cars alignment. Causing all sorts of problems driving it, especially at high speeds. That's when a wheel wobble starts to happen in the affected areas of the front passenger side of the car. Please help!

- Spokane, WA, USA

Letter from consumer re: Fair and equitable reimbursement customer treatment on 2010 Mazda 6 recall repair (defect) not totally paid for by Mazda warranty department.

- Cicero, NY, USA

Mazda incomplete recall 28181; NHTSA recall 18V-631; I had my vehicle inspected as required and was told due to rust/corrosion/perforations the front cross member needs to be replaced. Informed no parts available and Mazda has given no info on when parts may be available; dealers have no info at all on timing for repairs; cannot get thru to Mazda for more info and Mazda does not even list this on their site as a recall; this is a dangerous condition and afraid to drive this car

- Penfield, NY, USA

While applying the brakes at approximately 30mph, there was sharp jolt, and the steering wheel jerked all the way to the right. The low-traction indicator light came on and the car was not able to be safely steered. Upon visual inspection, the front right tire was turned outward, while the front left remained straight. A mechanic confirmed that the issue was caused by a fully corroded sub-frame which had cracked in half.

- Saugus, MA, USA

The car is only 8 years old and the sub frame has completely rusted out, deeming the car unfit to drive. This was only caught as I took the car in for estimate on brakes. I have 2 young children who ride in this car daily, so luckily no accident. I've noticed several complaints regarding this on the 2009 and 2010 models. Although I haven't been in accident (yet), I'm now forced to pay $2000 in repairs, or just replace the vehicle.

- Brunswick, OH, USA

My son was driving the car approximately 40mph on a state route in a rural area and experienced a sudden loss of steering control and sharp pull to the right when he was trying to brake. This nearly caused him to hit a truck. When he regained control he noticed the steering wheel was not aligned while going straight and the car continued to pull to the right. When he managed to make it home we jacked it up and removed the right front tire. I noticed that the cross member on the right side was completely rusted through. This was the only noticibly large area of rust on the car. The car is now undriveable.

- Rootstown, OH, USA

When driving home from the gym, the vehicle suddenly became difficult to control and there was an excessive amount of play in the steering wheel. After inspecting, my husband believes the cause is due to frame corrosion at the steering rack mount which appears to have been reported by other 2009 2010 Mazda 6 owners..

- Fairport, NY, USA

After exiting the highway applied th brakes and steering wheel went to 12:00 and 6:00 while the car kept going straight.apply the gas and wheei goes back to normal.hit the brakes and repeat the cycle again..took to dealership to find out rt. Front subframe is rusted thru.. car is no longer safe to drive and is parked at montrose Mazda in kent Ohio.new frame and labor is $2,000 and parts are backordered telling me others have to be having similar issues.. who orders a new frame for their car ? car was just at highway speed and then lost complere control of car.glad no one was hurt

- Kent, OH, USA

While driving straight wheel is at 12:00 and 6:00 and car is going straight..found at dealership that rt.front sub-frame rusted thru..car is no longer safe to drive and new frames are backordered even junkyards are out..had to rent and buy a new car

- Kent, OH, USA

On September 12, 2018 I took my 2010 Mazda 6I to a local Mazda dealership to get preventative maintenance done on the vehicle, replacing the drive belt. When the Mazda tech started the job, he discovered that the entire front sub-frame that holds the front end suspension, steering components, motor and transmission was rusted and rotted out with several holes and flaking metal. The tech was unable to perform the job as he stated he could not remove the sub-frame and keep it in tact. The tech reported that this created a hazardous and unsafe condition and that until repaired with a new or other-wise in-tact sub-frame the car would be unsafe to drive. Upon checking on-line I have discovered that this is quickly becoming a common problem with the Mazda 6 of this model year (2009 to 2019). The sub-frame should not be that rotted out in a 2010 vehicle with 101921 miles on it and no rust on the body.

- Endicott, NY, USA

The contact owns a 2010 Mazda 6. while driving approximately 30 mph, the steering wheel started to pull to the right. The vehicle was taken to an independent mechanic who determined that the passenger side subframe was severely corroded and flaky. The vehicle was not repaired. The vehicle was not taken to the dealer for diagnostic testing. The manufacturer was notified of the failure. The approximate failure mileage was 200,00. The VIN was unavailable.

- Gudley, MA, USA

As I was driving down the interstate my steering wheel rotated clockwise and was at an angle and my car continued to go straight down the road. It felt as if I were driving on ice and was very hard to control the vehicle. While making a turn my front tires began to squeal. It was very hard to turn. When braking the car shook dramatically. I took it to a local auto mechanic because I thought it was possibly something with the steering. The mechanic called back and was shocked to tell me the sub frame was completely rotten and had broken. It was hard for him to believe that a car that was only 8 years old would have that much corrosion on the frame. I purchased the car brand new and have had the car for the entire 8 years with no accidents at all.

- Eau Claire, WI, USA

Corrosion related steering issues. The frame of the car has rusted out where the lower control arm on the front passenger side connects to the frame. While coming to a quick stop the ABS kicked in and the car pulled to the right with a popping sound. The car would randomly pull to one side when driving resumed. Took the car in for new brakes and was informed that the frame has rusted out. Finding other like concerns I took the car to Mazda with no communication regarding the status of my vehicle. The car is 8 years old and should not have frame rust to the point of failure.

- Etna, OH, USA

I began having problems with the steering, especially when turning at intersections, it made some bang/bump noises, and felt like the front wheels weren't turning unless I really cranked the steering wheel. I took it to the dealer for an evaluation, and they promptly pulled it off the road, telling me it was unsafe to drive. Turns out the front subframe on the passenger side had rusted out so badly that it was almost split into two pieces, and I could literally poke holes through the rusted areas, affecting the operation of both the steering and suspension. If the subframe had indeed split, according to the mechanic, the steering would've failed and I could've lost the right front wheel.

- Liverpool, NY, USA

I was driving home from work, when I noticed that my steering was not working right. Every time I hit a bump in the road it became hard to control. To stay straight, my steering wheel had to be turn almost completely left. I figured I was just badly out of alignment. I took it to the shop to get my alignment done, and they told me the sub frame was rotted out. The car is only 8 years old and well maintained. He was not able to explain why it was rotted out, but the rest of the underneath looked good.

- Shelocta, PA, USA