One night I get home and as I'm raising the passenger window and it suddenly stops. I then try to wiggle the switch and it moves just bit more then nothing at all. It started to sprinkle a-little and I panicked. I thought, wow, the window motor just burned out and it's going to cost me hundreds of $ to fix and not even sure that's the issue.

I decided to just take apart the switch control module in the center console and see if the switch was broken or a loose wire possibly. After taking apart the center console and the switch module I found it to be fairly easy to fix. It turns out that carbon builds up between the tiny contacts I took a small pin and bent it at the tip on a 90 degree angle and scratched the surface between the contacts. I got some black residue on the tip of the pin and blew some compressed air. I put it back together and it worked perfectly. Seems it's a common issue with these switch modules. I posted a video of the process. Very simple to fix just make sure to be relaxed and have patience to do this as if your not careful you can break things and make the problem worse. Tools you will need Phillips screwdriver Small thin flat head screwdriver Very good flash light Sewing pin with the tip bent at 90 degree Small cup to hold all the disassembled parts and screws Compressed air can or good lungs And link to my video