2007 Mercedes-Benz SLK280
TSBs (Technical Service Bulletins)
Technical Service Bulletins (TSBs) for the 2007 SLK280 are official communications between Mercedes-Benz & their dealerships that describe processes for troubleshooting or fixing certain common problems. All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
-
TSB #LI46.15-P-058505
Creaking noise when making vertical or longitudinal adjustment to electrical steering column Read More »
-
TSB #SB-32-25-82
MERCEDES-BENZ: SHOCK ABSORBER PROCEDURE. *RM Read More »
-
TSB #SB-32-25-82
MERCEDES-BENZ: SHOCK ABSORBER PROCEDURE. *RM Read More »
-
TSB #SB-32-25-82
MERCEDES-BENZ: SHOCK ABSORBER PROCEDURE. *RM Read More »
-
TSB #SB-32-25-82
MERCEDES-BENZ: SHOCK ABSORBER PROCEDURE. *RM Read More »
-
TSB #PB-35-31-05
MERCEDES BENZ: MODEL 171.454, 456 (2005-2008) SLK CLASS; 204.054, 056, 081 (2008) C CLASS; 211.022, 056, 072, 087, 090 (2006-2008) E CLASS. VEHICLES PRODUCED BETWEEN 2/21/08 AND 4/3/08 WITH DIFFERENTIAL SERIAL NUMBER 1824214 TO 1865328. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #TSB-42-10-109
MERCEDES: CORROSION PROTECTION COATINGS FOR BRAKE COMPONENTS AND HARDWARE MAY BE DAMAGED AND OR STRIPPED AWAY IF HIGHLY CONCENTRATED ACID BASED CLEANERS ARE USED. Read More »
-
TSB #LI-58-40
XENTRY (MERCEDES): ENGINE WARNING LAMP IS CURRENTLY ON OR WAS ON AND A DELAY FAULT OF THE CAMSHAFT ADJUST TO CURRENT OR STORED IN THE ENGINE CONTROL UNIT. MODELS 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, AND 403. Read More »
-
TSB #033008
CHECK ENGINE LIGHT ON / FAULT CODES FC1200 / FC1208 STORED IN ME-SFI CONTROL UNIT. MERCEDES-BENZ MODEL C230, C280, C350, SLK280, SLK350, CLK350, CLK550, E350, E550, CLS550, S600, AND SL550. EQUIPPED WITH M272 ENGINE OR M273 ENGINE. Read More »
-
TSB #SB-2008070002
MERCEDES: REPLACE V BELT UPPER GUIDE PULLEY. THE V BELT UPPER GUIDE PULLEY OPTIMIZED FOR NOISE REDUCTION IS AVAILABLE. THE DEALER WILL REPLACE UPPER GUIDE PULLEY AT THE NEXT WORKSHOP VISIT. Read More »
-
TSB #470036
MERCEDES: THE FUEL LEVEL INDICATED IN THE INSTRUMENT CLUSTER DOES NOT MATCH THE ACTUAL FILL LEVEL. THIS MAY BE CAUSED BY A FAULT IN THE FUEL LEVEL SENSOR FUNCTION CHAIN: HYDRAULIC AND ELECTRICAL LINES AND THEIR CONNECTIONS, REAR SAM OR ... Read More »
-
TSB #470036
MERCEDES: THE FUEL LEVEL INDICATED IN THE INSTRUMENT CLUSTER DOES NOT MATCH THE ACTUAL FILL LEVEL. THIS MAY BE CAUSED BY A FAULT IN THE FUEL LEVEL SENSOR FUNCTION CHAIN: HYDRAULIC AND ELECTRICAL LINES AND THEIR CONNECTIONS, REAR SAM OR ... Read More »
-
TSB #LI35.30-P-058566
Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). Heard once when changing from forward to reverse (and vice versa) Read More »
-
TSB #LI82.95-P-056655
Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement. Read More »
-
TSB #LI82.85-P-055695
The COMAND unit does not start or the COMAND display remains dark. The COMAND unit cannot be operated. Note: The problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30). Read More »
-
TSB #LI-58-40
XENTRY (MERCEDES): ENGINE WARNING LAMP IS CURRENTLY ON OR WAS ON AND A DELAY FAULT OF THE CAMSHAFT ADJUST TO CURRENT OR STORED IN THE ENGINE CONTROL UNIT. MODELS 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, AND 403. Read More »
-
TSB #SC-2012070002
MERCEDES: CAMSHAFT ADJUSTMENT SOLENOID MAY LEAK OIL DUE TO SETTLING PROPERTIES OF SEAL AND THE ENGINE WIRING HARNESS WILL BE RETROFITTED WITH FOUR ADAPTER HARNESSES AS A PRECAUTIONARY MEASURE. Read More »
-
TSB #RB-2009060005
MERCEDES BENZ SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SOFTWARE CALIBRATION NUMBER (SCN) CODING; ENGINE CONTROL MODULE. Read More »
-
TSB #P-SC-2017030011
Replace Driver-Side and (if applicable) Front Passenger Air Bag Read More »
-
TSB #LI77.30-P-056644
Water entry through front section of retractable hardtop with the following localization: - Partial water entry in the area of the side seals to the A-pillar (for area see Fig. 1) when accelerating/braking the vehicle. Read More »
-
TSB #SB-40-15-68
MERCEDES: THE INSTRUMENT CLUSTER DISPLAYING TIRE PRESSURE MONITOR INOPERATIVE AND THERE IS A CORRESPONDING STORED FAULT CODE OF 5581 (FRONT OR REAR SENSOR LOCALIZATION FAILED), THIS IS BECAUSE THE DIFFERENCE IN THE SIGNAL STRENGTH ... Read More »
-
TSB #424586
ALL MODEL 171, 203 AND 209 VEHICLES EQUIPPED WITH SALES CODE 477 - TIRE LOSS WARNING SYSTEM (INDIRECT ESP BASED) WITH RUN FLAT TIRES. [TIRE PRESSURE MONITORING INACTIVE] DISPLAYED INSTRUMENT CLUSTER. MODEL YEAR 2005-2007. Read More »
-
TSB #LI91.25-P-059385
The lumbar support cannot be set from stage 0 to stage 5. Stage 5 can only be set after setting stage 10 first Read More »
-
TSB #LI91.25-P-059380
Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky. Read More »
-
TSB #LI82.85-P-058582
Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console. Read More »
-
TSB #LI82.70-P-060004
iPhone mobile phone: Various complaints after software update to iOS8 Read More »
-
TSB #C1A140101
This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the ... Read More »
-
TSB #2006110005
INSTALL SOFTWARE FOR NAVIGATION SYSTEM. *KB UPDATED 3/5/09. *PE Read More »