Anti-lock brakes engage almost every time brake is applied. Tsb says rust has to be cleaned out of the right rear wheel hub and a drain hole has to be added, right rear ABS($250 +) sensor has to be replaced, with possible replacement of ABS actuator($1000 +) required.

- Woodland, ME, USA

The ABS control module on the Nissan 2004 is not only faulty but dangerous. The problem comes from a short on the passenger rear wheel sensor short which in turns causes the ABS module to fail. The ABS motor will run even without the key in the ignition causing the battery and motor to become very hot.

- Ecru, MS, USA

I have a 2004 Nissan Maxima that I bought new in 2003 in California. Within months to the first year, I have had continuous problems with the front end. I've had my wheels aligned, tires balance numerous times and checked due to a shimmy in the steering wheel, tires wearing unevenly and a clanking or thumping noise in the front right when going over a bump. These problems I have had for years and complained continuously. Had the car in the shop many times for these problems, but to no avail. Nissan fixed noise after 5 times in the shop in 2004 and 2005. Now over the years the noise has come back, but the shimmy was always a problem. I just learned to ignore it until now. I'm reading now online of other Maxima owners having the same problem. I'm planning on approaching my Nissan dealer here in Florida about the shimmy, abnormal tire ware and clankiing noise as well. Can you help me?

- Daytona Beach, FL, USA

Nissan Maxima 2004. My wheel bearing went out in my car I understand this should not have happened to a newer model Nissan.

- Enterprise, MS, USA

Goodyear tire 245/45/18.

- Hartford, CT, USA